motor shaft key for sale, brand-new and used.

JEWELERS FLEX SHAFT KIT WITH NUMBER# 30 HAND PIECE AND WOOD CARVING HAND PIECE WITH CHISEL SET NEW This is the perfect tool for woodworking! Won't get bogged down! 500 TO 22,000 RPM Motor 1/3HP with full 5 year warranity We carry a full line of parts and provide service when ever needed 110 Volt Dimensions: 12 1/4" by 16 1/2" by 4" Motor hanger to mount on any surface 38" flexible shaft Double Insulated Includes variable speed foot control.

This is off a machine that never did get used. It's inlet is 1/2" Female NPT and the outlet is a 1/4" male NPT. General Information Case Drain: No Case Drain Inlet And Outlet Ports Size: Manifold Ports 5/16"-18 UNC Thread Geometric Displacement (cu-iIn./rev): 14.10 Output Shaft Size: 1" Straight With Woodruff Key Series: H Series Gerotor Motor SPECIAL FEATURES: Not Listed Type Of Mount: 4 Bolt - 1-3/4" Pilot Dia.

Preplumbed and pretested Belt drive Fits 24mm pump shaft Requires 13 HP gas engine; 10 HP electric motor Bolts not included; use existing bolts from old pump to install new pump Key Specs Top of page Item# A1572041 Ship Weight 20.0 lbs Application Pressure washer pump GPM 3 1/2

Parker TG0240MS030AAAA, LSHT Hydraulic Motor TG0240MS030AAAA Replaces Old TRW Ross Motor Number ME 150103AAAA New Other/ Lightly used if ever Does NOT appear to have been bolted down. Has Been Handled Missing a washer nut on the end of the shaft, Appears to be in great condit

For sale is a used shaft coupler. Couples a 1.125" shaft to a .75" shaft. Consists of two sprockets joined with a double row chain.

Dumore Duo-Flex Flexible Shaft Grinder. 115 Volt, 1.0 Amps. Two speeds – 15,000 RPM No Load Direct Drive and about 3300 RPM gear reduction drive.

Bison DC Gear Motor model 1.3 RPM 90v DC 1100in/lb. 011-562-1397 Grainger number 20UE20 HOLLOW SHAFT KEYED. 3/4" shaft 3/16 Key Actually has very low run time.

NorthStar Easy Bolt-On Pressure Washer Pump — 4000 PSI, 3.5 GPM, Belt Drive, Features + BenefitsPreplumbed and pretestedBelt driveFits 24mm pump shaftRequires 13 HP gas engine; 10 HP electric motorBolts not included; use existing bolts from old pump to install new pump Key SpecsItem# A1572041Ship Weight 20.0 lbsApplication Pressure washer pumpGPM 3.5Max. PSI

UnbeatSale Store Home

This is a nice strong running Dual Shaft A.C. Motor from a vintage Sears Craftsman 12" Wood Lathe Model # 149-23871 with twin 1" diameter tubular bed rails 1/2 Horsepower 1725 RPM 60 HZ 1 phase 115 Volt 8.4 amp reversible wired right handed Clockwise on 5/8" (right) shaft as you face the nameplate. Comes with mounting bracket and clips...key and spindle cover as pictured.

US MOTORS 1.5 Hp Hazardous Location TEFC Motor 208-230-460 Volts / 3 Phase 1740 Rpm 145T Frame Rigid Mount

1/2 hp electric motor 1725 rpm 115/230 5/8 shaft singel phase MODEL 36549 VOLTS 115/230 RPM 1725 SHAFT 5/8” LENGTH 11” CENTER HIGHT 3-7/16”

Ross / TRW Hydraulic Roller Vane Torque Motor MAB 32 Manufacturer: Ross / TRW Part Number MAB - 32 - 2065 - A1 The MAB Series torqmotor is simple and reliable. The design requires fewer parts and has only five seals, compared to as many as fourteen in other motors. The MAB maintains speed under any pressure within its design limit.

Model CPA-2472 Marion Continuous Mixer Crated and ready to ship.

For sale is a rino 30:1 gear reducer that is powered with a DC gearmotor. The GEARMOTOR is strong by itself and when you multiply that times 30 the output torque on this unit is very strong.  Input voltage is between 5-12 volts DC. Output shaft is complete with key and locking collars.