motor shaft key for sale, brand-new and used.

Mechanical Specifications: Motor primary use Compressor Duty Horsepower 5 RPM 3600 Rotation Reversible Enclosure type ODP Frame size 56H Mounting Foot Connection box End Shaft diameter (in) 0.625 Shaft type Smooth shaft w/ 0.187 x 0.187 key

GE M9451 AC Electric Motor M14693 - 3 Phase, 40 HP, 324T Frame, TEFC, 1800 RPM, 460 Volts, 60 Hz, Severe Duty IEEE 841 Mechanical Specifications: Motor primary use Severe Duty Horsepower 40 RPM 1800 Rotation Reversible Frame size 324T Enclosure type TEFC Mounting Foot Connection box Side Shaft diameter (in)

[ Baldor Electric EM3311T 7-1/2 HP 1770 RPM 60 Hz 20.4-19.4/9.7 A Motor

Move Motor Oil With Confidence Tired of whimpy oil pumps? We've gone through 4 years of development on these pumps. Upgrades have included a custom US Made Baldor motor, viton seals to the pumpheads, scrapping troublesome pressure regulators.

Allen Bradley - MP-Series Low-inertia Servo MotorMPL B330P - SJ22AA or MPL B330P - MJ22AANo motor labelVoltage Class : 400VFrame Size (IEC 72-1 flange number) 100 mmRated Speed : 5000 RPMFeedback : M (Multi-turn high-resolution encoder) or S (Single-turn high-resolution encode

RELIANCE 3/4 HP DC ELECTRIC MOTOR LE0056C 90 VDC 1750 RPM T56S1008A CONTINUOUS DUTY WITH ADJUSTABLE CONTROLLER Model# T56S1008A

[ Dayton 10 HP 3540 RPM 208-230/460 V 3 PH General Motor

This is a new old stock motor. There is an inconsequential chip on one of the fins. Local pickup preferred.

[ Century CPE26 5 HP 1753 RPM 208-230/460V Close-Coupled Pump Motor

Technical Specs

GE 1/3 HP AC electric motorModel# 5K33JN3393 Phase Volt: 208-230/460 60hzAmp: 1.5-1.6/.8RPM: 1725 5/8" diameter shaft with 3/16" key slot.Shaft length is approx. 1-7/8" long.

[ Dayton 7-1/2 HP 3470 RPM 230 V General Purpose Motor

This is a strong running Dual Shaft 1/2 Horsepower Powr Kraft AC Capacitor Start Motor with Ball Bearings from a Wood Lathe Dust and dirt wear and tear rust and pitting but in good working condition.The switch on the motor does not work. This was plugged into a switch on the table 1/2 Horse Power 1725 RPM 115 Volt 60 Cycle 7.8 amp.1 phase. 60 HZ Has 5/8" diameter shafts with key way about 2" long overall.

101-1004-009 Manufactured by EATON CORPORATION CHAR LYNNHYDRAULIC MOTOR 353RPM 1650PSI 1/2IN PIPE PORTS Standard Seals, Painted Low Glos

Char-Lynn Brand H-Series Low Speed High Torque Hydraulic Motors