National Instruments NI 9472 8-Chan 24 V Logic, 100 µs, Sourcing Digital Output, US $80.00 – Picture 0

National Instruments NI 9472 8-Chan 24 V Logic, 100 µs, Sourcing Digital Output, US $80.00 – Picture 1

National Instruments NI 9472 8-Chan 24 V Logic, 100 µs, Sourcing Digital Output, US $80.00 – Picture 2

National Instruments NI 9472 8-Chan 24 V Logic, 100 µs, Sourcing Digital Output, US $80.00 – Picture 3

National Instruments NI 9472 8-Chan 24 V Logic, 100 µs, Sourcing Digital Output, US $80.00 – Picture 4

National Instruments Ni 9472 8-chan 24 V Logic, 100 µs, Sourcing Digital Output

US $80.00

Houston, Texas, United States
Jan 29th

Open on mobile:
QR code

I am selling one National Instruments NI 9472 module. The 9472 module has an MSRP of $99. This unit was installed in an enclosure for data acquisition, but the build was never completed. The contractor that was doing this work was released before their equipment was ever finished (as can be seen in the pictures). This is why the 9472 are listed as NEW as it WAS NEVER POWERED ON and comes with none of the original packaging or paperwork. I have powered on the entire cRIO chassis and all modules shown and everything powers up fine. This listing is for one NI 9472 module and not the other National Instrument modules or cRIO chassis shown. I am also selling the other modules and cRIO chassis seen in the photos. They are: 1 - NI cRIO-9074 Integrated 400 MHz Real-Time Controller (151515203040) 4 - NI 9203 ±20 mA, Current Analog Input, 200 kS/s, 8 Ch Module (151515227642) 1 - NI 9219 Analog Input, 24-Bit, 100 S/s/ch, 4 Ch Module (151516404587) 1 - NI 9421 24 V, Sinking Digital Input, 8 Ch Module (151516426181) 1 - NI 9871 4-Port, RS485/RS422 Serial Interface Module cRIO (151516467700) 1 - PS-15 Power Supply 5 A, 24 VDC cRIO (151516478862) Please check out these other listings. An overview of the NI 9472 module is listed below from the National Instrument website: The National Instruments NI 9472 is an 8-channel, 100 µs sourcing digital output module for any NI CompactDAQ or CompactRIO chassis. Each channel is compatible with 6 to 30 V signals and features 2,300 Vrms of transient overvoltage protection between the output channels and the backplane. Each channel also has an LED that indicates the state of that channel. With the NI 9472, you can connect directly to a variety of industrial devices such as motors, actuators, and relays. There are two connector options for the NI 9472 - a 10-position screw-terminal connector and a 25-position D-Sub connector. This industry-standard 25-position D-Sub connector provides for low-cost cabling to a wide variety of accessories available from NI or other vendors. A number of vendors with custom D-Sub cable fabrication services can deliver cables with a pinout that matches your exact application needs. Specifications Summary General Product Family Digital I / O Industrial I / O Measurement Type Digital Specialty Digital Form Factor CompactDAQ CompactRIO RoHS Compliant Yes Isolation Type Ch-Earth Ground Isolation Analog Input Single-Ended Channels 0 Differential Channels 0 Analog Output Number of Channels 0 Digital I / O Bidirectional Channels 0 Input-Only Channels 0 Output-Only Channels 8 Timing Hardware Maximum Clock Rate 10 kHz Logic Levels 24 V Other Requires External Power Supply Digital Output Output Type Sourcing Current Drive Single 0.75 A Current Drive All 6 A Maximum Voltage Range 6 V - 30 V Counters / Timers Counters 0 Physical Specifications Length 9 cm Width 2.3 cm I / O Connector 25-pin D-Sub Screw terminals Operating Temperature -40 °C - 70 °C

Condition:	New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...	Brand	National Instruments
MPN	779004-01
Model	NI 9472
Country/Region of Manufacture	Hungary