+ Post new Ad
New Gear set for Rockwell Delta 18'' planer 428-02-051-5002 & 428-02-051-5003, US $529.00 – Picture 0
New Gear set for Rockwell Delta 18'' planer 428-02-051-5002 & 428-02-051-5003, US $529.00 – Picture 0

New Gear Set For Rockwell Delta 18'' Planer 428-02-051-5002 & 428-02-051-5003

US $529.00

  • Oxford, Pennsylvania, United States
  • Jan 30th
Open on mobile:
QR code
SOLD OUT UNTIL 9/1st/2011 sorry  Replacement gear set for a Rockwell Delta 18'' planer. New manufactured to original specs from the same material with the same hardness as the originals. $12.50 flat rate shipping and handling to the USA Over 100 sets sold. Delta Rockwell part numbers:   "Worm Wheel"  428-02-051-5002  (Worm gear)and   “Worm & shaft” 428-02-051-5003   (Worm)    These should always be replaced in pairs. If only one is replaced is will wear out the un-replaced one quickly and itself very prematurely. Exact match to the original in hardness and teeth. Modern Recommended oil for the gearbox is Mobil SHC634                                            Check my other listings for; -Bearing set for the gear box Item # 110699411563 -Infeed & outfeed & table roller bearing set Item #  150616770381 Delta late18" wedge bed planer cutter head bearings NEW - 110701564463 or the earlier version with serial numbers 179-5783 and earlier. :110686315501  Please note: I will combine purchases for other Delta 18" Wedge Bed Planer parts if you wait for an invoice with combined shipping.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Grade Professional

Directions

Similar products from Professional planing machines

DELTA ROCKWELL 22-101 PLANER 13" X 5" - GEAR BOX -

DELTA ROCKWELL 22-101 PLANER 13" X 5" - GEAR BOX -

  • Seattle, Washington, United States
  • Jan 30th
DELTA ROCKWELL 22-101 PLANER 13" X 5" - CHIP BREAKER -

DELTA ROCKWELL 22-101 PLANER 13" X 5" - CHIP BREAKER -

  • Seattle, Washington, United States
  • Jan 30th
DELTA ROCKWELL 22-101 PLANER 13" X 5" - TABLE ROLLER / IDLE ROLLER -

DELTA ROCKWELL 22-101 PLANER 13" X 5" - TABLE ROLLER / IDLE ROLLER -

  • Seattle, Washington, United States
  • Jan 30th
DELTA ROCKWELL 22-101 PLANER 13" X 5" - HAND WHEEL CRANK - TABLE UP AND DOWN

DELTA ROCKWELL 22-101 PLANER 13" X 5" - HAND WHEEL CRANK - TABLE UP AND DOWN

  • Seattle, Washington, United States
  • Jan 30th
Oliver 4455 22" Planer with Straight Knife Cutterhead, 10 HP, 3Ph, Powermatic

Oliver 4455 22" Planer with Straight Knife Cutterhead, 10 HP, 3Ph, Powermatic

  • Stone Mountain, Georgia, United States
  • Jan 30th
Footprint 280205 Professional Smooth Wood Plane

Footprint 280205 Professional Smooth Wood Plane

  • Ferndale, Washington, United States
  • Jan 30th
Baileigh 20" Cap. Planer Model IP-2011-HD, 220V, 3 PH, 7.5 HP, Demo, Free Ship

Baileigh 20" Cap. Planer Model IP-2011-HD, 220V, 3 PH, 7.5 HP, Demo, Free Ship

  • Sheboygan, Wisconsin, United States
  • Jan 30th
Belsaw Planer 5Hp Model 910 / Accepts 16" and works very well.

Belsaw Planer 5Hp Model 910 / Accepts 16" and works very well.

  • Tinley Park, Illinois, United States
  • Jan 30th
ProGrade Pocket Plane For use on Wood Drywall & Automotive Body Filler Planer

ProGrade Pocket Plane For use on Wood Drywall & Automotive Body Filler Planer

  • Anderson, Indiana, United States
  • Jan 30th
newman planer 500 molder/matcher

newman planer 500 molder/matcher

  • Anderson, Texas, United States
  • Jan 30th
MINIMAX FS41 ELITE 16" JOINTER PLANER SINGLE PHASE MADE IN 2005

MINIMAX FS41 ELITE 16" JOINTER PLANER SINGLE PHASE MADE IN 2005

  • Saint Petersburg, Florida, United States
  • Jan 30th
Snow Tapper Model 34-NT Inclined Tap Unit 3/4 Hp 220V 3Ph 6-5/16"

Snow Tapper Model 34-NT Inclined Tap Unit 3/4 Hp 220V 3Ph 6-5/16"

  • Watertown, Connecticut, United States
  • Jan 30th
DELTA ROCKWELL 22-101 PLANER - BED JACK SCREWS WITH BEVEL GEARS x 2

DELTA ROCKWELL 22-101 PLANER - BED JACK SCREWS WITH BEVEL GEARS x 2

  • Seattle, Washington, United States
  • Jan 30th
Felder AD7 51 PRO 20" Jointer / Planer Combo Machine, Combination

Felder AD7 51 PRO 20" Jointer / Planer Combo Machine, Combination

  • Stone Mountain, Georgia, United States
  • Jan 30th
36" TRISTATE MDL#T-36-4 WOOD CUTTING VERTICAL RESAW BAND SAW 20 HP 230/460V 3 PH

36" TRISTATE MDL#T-36-4 WOOD CUTTING VERTICAL RESAW BAND SAW 20 HP 230/460V 3 PH

  • Cedarburg, Wisconsin, United States
  • Jan 30th
Grizzly Tools Planer Pals

Grizzly Tools Planer Pals

  • Overland Park, Kansas, United States
  • Jan 30th
makita speed planer blades d17217

makita speed planer blades d17217

  • Rosedale, Maryland, United States
  • Jan 30th
POWERMATIC PLANNER KNIFE GRINDER C4S34DB1A LEESON 1/3HP 3450 RPM

POWERMATIC PLANNER KNIFE GRINDER C4S34DB1A LEESON 1/3HP 3450 RPM

  • Bennet, Nebraska, United States
  • Jan 30th
Weinig 630225 spiral planer head

Weinig 630225 spiral planer head

  • Woodburn, Oregon, United States
  • Jan 30th
RARE MINT Porter Cable PC Porta Plane 126 - Mint in Box used Once NR LOOK

RARE MINT Porter Cable PC Porta Plane 126 - Mint in Box used Once NR LOOK

  • Saint Petersburg, Florida, United States
  • Jan 30th

People who viewed this item also vieved

OLIVER 88-D HEAVY DUTY TABLE SAW, 18" BLADE, 7.5 HP, 4.75" CUT DEPTH, 1942

OLIVER 88-D HEAVY DUTY TABLE SAW, 18" BLADE, 7.5 HP, 4.75" CUT DEPTH, 1942

  • Waukesha, Wisconsin, United States
  • May 31st
DEWALT INDUSTRIAL SAW 3 PHASE POWER HD TABLE MODEL CP

DEWALT INDUSTRIAL SAW 3 PHASE POWER HD TABLE MODEL CP

  • Ottawa Lake, Michigan, United States
  • May 31st
OLIVER 416-36 VERTICAL WOODWORKING BANDSAW, 36" X 36" TABLE, 1964

OLIVER 416-36 VERTICAL WOODWORKING BANDSAW, 36" X 36" TABLE, 1964

  • Waukesha, Wisconsin, United States
  • May 31st
Dynabrade sander

Dynabrade sander

  • Kokomo, Indiana, United States
  • Jun 8th
DELTA SHOPMASTER DP200 DRILL PRESS TABLE TOP IN GREAT CONDITION MULTI SPEED

DELTA SHOPMASTER DP200 DRILL PRESS TABLE TOP IN GREAT CONDITION MULTI SPEED

  • Kissimmee, Florida, United States
  • Jun 9th
Delta Drill Press Model 11-950 5 Speeds Great Condition Ready For Work.

Delta Drill Press Model 11-950 5 Speeds Great Condition Ready For Work.

  • Kissimmee, Florida, United States
  • Jun 9th
MAPLE WORK BENCH TOP BUTCHER BLOCK VIDMAR / LISTA / BALLY CONDITION 400

MAPLE WORK BENCH TOP BUTCHER BLOCK VIDMAR / LISTA / BALLY CONDITION 400

  • Oceanport, New Jersey, United States
  • Jun 9th
Dynabrade 58430 5" Dual Action DA Orbital Sander

Dynabrade 58430 5" Dual Action DA Orbital Sander

  • Cincinnati, Ohio, United States
  • Jun 9th
DYNABRADE DYNAFILE ll MOTOR BODY ONLY - MODEL 40600 NICE CONDITION

DYNABRADE DYNAFILE ll MOTOR BODY ONLY - MODEL 40600 NICE CONDITION

  • Collierville, Tennessee, United States
  • Jun 9th
Gorbel, 1 Ton Gantry Crane 10' Span 10' Height,easily moved on Phenolic casters

Gorbel, 1 Ton Gantry Crane 10' Span 10' Height,easily moved on Phenolic casters

  • Fishers, New York, United States
  • Jun 18th
Paul CNC Optimizing Crosscut system Used Woodworking Machinery

Paul CNC Optimizing Crosscut system Used Woodworking Machinery

  • Tracy, California, United States
  • Jun 18th
Wood's Vacuum lifter Full power Tilt 1500 Pound capacity Model PT10Air

Wood's Vacuum lifter Full power Tilt 1500 Pound capacity Model PT10Air

  • Laurel, Montana, United States
  • Jun 18th
3d Model STL for CNC Router Engraver Machine Relief Artcam

3d Model STL for CNC Router Engraver Machine Relief Artcam

  • Великий Устюг, Вологодская обл., Russian Federation
  • Jun 22nd
HY-3040 4 Axis CNC Aluninum Router Machine for Drilling, Milling 2 YRS WARRANTY

HY-3040 4 Axis CNC Aluninum Router Machine for Drilling, Milling 2 YRS WARRANTY

  • Surrey, BC, Canada
  • Jun 22nd
HY-3040 3 Axis Desktop PCB CNC Router Drilling Factory Direct - DHL - 2YRS WRNTY

HY-3040 3 Axis Desktop PCB CNC Router Drilling Factory Direct - DHL - 2YRS WRNTY

  • Surrey, BC, Canada
  • Jun 22nd
Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe

Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe

  • Ada, Ohio, United States
  • Oct 28th
Delta Rockwell Milwaukee heavy-duty wood lathe headstock cover for model 46-450

Delta Rockwell Milwaukee heavy-duty wood lathe headstock cover for model 46-450

  • Vista, California, United States
  • Oct 28th
Walker Turner Lathe Banjo with Delta Tool Rest

Walker Turner Lathe Banjo with Delta Tool Rest

  • DeKalb, Illinois, United States
  • Oct 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies