nipple pipe for sale, brand-new and used.

Modified LF63 to ASA 4.25 Inch (2-5/8"ID) SS Pipe Inlet w/NW25 Nipple (3/4"ID)

RIDGID® Model No. 819 Nipple Chuck Has all the adapters, 1/2" - 2') and wrench. This is a very nice used piece.

This isn't the cheap imitation brands that are out there with their cheap metal. This is a nice Ridgid #819 nipple chuck with 5 adapters. From 1/2", 3/4", 1", 1 1/4", 1 1/2" to 2".

This isn't the cheap imitation brands that are out there with their cheap metal. This is a nice Ridgid #819 nipple chuck with 8 adapters. From 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2" to 2".

SDT 51005 819 NPT Nipple Chuck Kit 1/2"- 2" fits RIDGID® Pipe Threading Machines The 819 nipple chuck is a quick and easy tool for holding short and close nipples or studs for threading.

Brand New 3000 watt Submersion heater by Hot Watt All 316 Stainless construction Pipe fitting is 1 inch thread 20 1/4" long to bottom of pipe nipple 22" overall length 220 volt 3 phase Free shipping within the lower 48 states only, contact for international, Hawaii and other shipping rates

2" x 24" brass pipe threaded on both ends. New never used, Has a few nicks due to shelf wear. FREE shipping to the US.

Lot of 4 stainless steel pipe flanges, includes one stainless steel nipple 1-1/4" Used in good working condition, see photos provides.

ebay template .company_name

up for sale are these lot of 100 3/4 inch stainless steel pipe fittings. they are new, but have been stored outside in a steel crate and some might have a little rust staining on them from the crate. Check out my other items!other payment options available, contact me first.

Up for sale are a used 1 inch by 16 inch flexible coupler female by female with a nipple in one end and a used 2 inch by 17 inch flexible coupler female by female with a nipple in one end both for hazardous location D. Both are used and have pipe wrench marks on the ends and are a little tarnished but are still functional. What you see is what you get.

Never used. Has the metering disc, but is missing the pipe nipple that the foam feeds into. This is not a 3/4 or 1" pipe thread.

Specification for Heat Transfer Products, Inc. Munchkin Boiler Typical Specification for the Munchkin High Efficiency Boiler Model Numbers: T50/T80M/80M /140M/ 199M (Modulation Range 18,000 to 199,000) The Boiler shall be a Munchkin Boiler, manufactured by Heat Transfer Products Inc. Model _____M.

For Sale - - (4) 5' lengths of 10" clamping ductwork - (5) 10" clamps - (1) 10" adjuster nipple - Free local pick up Pipe is new from old stock.