nitrogen fittings for sale, brand-new and used.

GLOBAL MODULAR AUTOMATIC NITROGEN CONTROLLER, VERY NICE CONDITION. GENERAL INFORMATION ABOUT THE CONTROLLER. Help to prevent contamination inside of the Desiccators Chamber with 1/4" line of nitrogen continually monitoring set point and keep low humidity (low as 0% R/H).

Amerex 451 wheeled 150 lb Commercial Dry Chemical Fire extinguisher with Nitrogen tank. Brand new Unit. The dolly handle is bent downwards ( wreight damage) As shown on pictures.

This is a pre-owned Peak Scientific Nitrogen & Air Generator Model ANG 400/2 with a maximum pressure of 145 PSI or 10 barg Upon inspection, all tubing, valves and fittings are in excellent condition. Upon powering on, the pressure rises, I couldn't test it further due to the lack of nitrogen and air outlet. Please refer to the pictures and all inquiries are welcomes.

CGA-580 ARGON C25 Regulator Inlet NUT & 3" NIPPLE Fittings - NITROGEN HELIUM a.imagelink {color:#0000FF;} a:hover.imagelink {color:#0000FF;} a:visited.imagelink {color:#800080;} a.imagelink img.auctionimage { border: 2px solid #0000FF; } a:visited.imagelink img.auctionimage { bo

Blue Monster Teflon Tape - PTFE Thread Tape- 1/2" x 1,429" Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That’s 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a l

var itemNumber = window.ebayItemID ?

Uniweld H2SSM Service Hose with Brass Knurled 1/4-Inch Female Flare Fittings with Rubber Gasket Seats, 24-Inch Uniweld H2SSM - 24-Inch (60cm) Service Hose has brass knurled 1/4-Inch Str. Female Flare fittings with rubber gasket seats and is designed for finger tight connections to Uniweld accessories including part no. BG1 blowgun, part no.

Braided Stainless Cryogenic Hoses w/Aeroquip 5400-S5-8 Fittings

Nitrogen (N2) hose with standard D.I.S.S. female fittings on both ends. D.I.S.S.

The McDantim Trumix™ Blending Panel was specifically designed to fill the needs of the U.S. Beer Dispensing Market. The Panel is a small wall-mounted unit that tucks neatly and safely out of the way.

Auction is for 1 ea of a Pneumatic Ball valve with 1/4" OD push in fitting ends. Great for all sorts of pneumatic circuits and projects that require isolation or shut off. Rated for Compressed Air and Nitrogen Pressure range 0-100 PSIG Item comes with our 30 day no questions asked warranty.

OMEGA ROTAMETER - 65 mm flowtube aluminum frame -16.77 cc/mi air 0.28 cc/min water

Please Read the Whole Ad! You will only receive what you see in the ad unless otherwise stated.

Please Read the Whole Ad! You will only receive what you see in the ad unless otherwise stated.

Very good used condition - Very clean inside and out - 100% guaranteed - Some scratches and scuffs typical of used equipment. Lab-Line Thermo-Flask LN2 vapor trap - Copper coil has 1/4 inch female tube compression fittings on both ends. Catalog number 2133 Will be packaged carefully and shipped via USPS or FedEx - Free shipping to continental USA!

Leland mini regulator 0-19 psi, shown with Leland 18 gram nitrogen canister, brass fittings, female ball lock (these parts not included). For use with carbon dioxide, nitrogen, argon, helium, 5/8-18 thread inlet, 1/8" npt outlet. Use with Leland 74 gram co2 cartridges to dispense a whole 5