six position Buttstock is made out of Mil Spec grade nylon 6.6 glass filled polymer. Buffer tube, buffer, buffer spring, end plate, and castle nuts are included in this kit. Best Deal in usa.
elbow pneumatic fittings, with teflon coated. Thread type:NPT Thread Size: 1/8 Tube Size: 3/8 Fluid Types Air (No other type of gas or liquid) Working Pressure Range: 0-150PSI 0-9.9KgF/cm2(0-990KPa) Negative Pressure -29.5 Hg -750mm Hg(10 Torr) Working Temperature: 32-140F 0-60C Suggested Tube Material: Nylon and Polyurethane
Straight pneumatic fittings, with teflon coated. Thread type:NPT Thread Size: 1/8 Tube Size: 1/4 Fluid Types Air (No other type of gas or liquid) Working Pressure Range: 0-150PSI 0-9.9KgF/cm2(0-990KPa) Negative Pressure -29.5 Hg -750mm Hg(10 Torr) Working Temperature: 32-140F 0-60C Suggested Tube Material: Nylon and Polyurethane
Elbow pneumatic fittings, with teflon coated. Thread type:NPT Thread Size: 1/8 Tube Size: 1/4 Fluid Types Air (No other type of gas or liquid) Working Pressure Range: 0-150PSI 0-9.9KgF/cm2(0-990KPa) Negative Pressure -29.5 Hg -750mm Hg(10 Torr) Working Temperature: 32-140F 0-60C Suggested Tube Material: Nylon and Polyurethane
Made of plastic sleeve and brass body Fluid Types Air (No other type of gas or liquid) Working Pressure Range: 0-150PSI 0-9.9KgF/cm2(0-990KPa) Negative Pressure -29.5 Hg -750mm Hg(10 Torr) Working Temperature: 32-140F 0-60C Suggested Tube Material: Nylon and Polyurethane Tube 3/8" Thread: 1/4" NPT
Eaton Weatherhead Coll O Crimp H43606 3/8" SAE 100R7 2250 PSI Max WP Approximately 57' - It is rolled up, so I measured around the roll, then multiplied by the # of rings, conservatively estimated. This is double hose I guess you'd say, like a double barrel shot gun.
Nylaflow 367-6 3/8" 2250 PSI SAE100R7 207' Hydraulic Hose Nylon Non-Conductive Here's some info on the hose from another site (http://www.asybco.com/pdf/boyaux.pdf) (PAGE 27) (do your own research to verify) : LUBRICATION LINE HOSE Nylaflow Types 367 • SAE 100R7 • Non-conductive medium pressure hydraulic hose for hydraulic oil and lubrication oil lines. • Orange, non-pin-pricked, abrasion resistant polyurethane cover.
Eaton Weatherhead H43612 3/4" SAE100R7 27' Here's some info on the hose from another site (http://www.fastenal.com/catalog_pages/2008/10-83.pdf)(do your own research to verify) : H436 Perforated Cover HoseSAE 100R7
Eaton Weatherhead H43616 1" SAE100R7 42' Here's some info on the hose from another site (http://www.fastenal.com/catalog_pages/2008/10-83.pdf)(do your own research to verify) : H436 Perforated Cover HoseSAE 100R7
Eaton Weatherhead H43516 1" SAE100R7 50' Thermoplastic Hose Nylon Here's some info on the hose from another site (http://www.fastenal.com/catalog_pages/2008/10-83.pdf)(do your own research to verify) : Typical Application: Compatible with most hydraulic fluids, designed for use where electric shock hazards exist. Maximum leakage is 50 Micro Amperes per foot at 75 KV per foot for five minutes.
Tubing Specifications: Color: Black Outside Diameter: .250 or 1/4 or 6.4 mm Inside Diameter: .180 or 4.6 mm Wall (Inches unless noted): .035 or .9 mm Bend Radius (Inches unless noted): 1 Durometer: 78R Tube Type: Straight Working Pressure at 75° F: 290 PSI Working Pressure at 150° F: 170 PSI Fitting Recommendation: Push-In Fitting Recommendation: Compression Unit of Measure FT
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.