you are bidding for one one collet chuck, 2" shank you are bidding for one 014-03-01-11-113 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect
METAL LATHE CHUCK REAR MOUNTING PLATE. MEASURES 6" ACROSS THE OUTSIDE OF OPPOSITE MOUNTING PINS. 15-3/4" OD, 4" hole, FRONT PROJECTION THAT GOES INTO REAR OF CHUCK IS A LITTLE OVER 13", PLENTY OF METAL THERE TO MACHINE IT FOR A DIFFERENT CHUCK OR USE FOR A FACEPLATE.
FACE PLATE WITH LARGE WELDED SHAFT CAN BE CHUCKED IN YOUR LATHE SO YOU DON'T HAVE TO REMOVE YOUR CHUCK TO DO OCCASIONAL FACEPLATE WORK. WORKS GREAT.014-12-12-T-68-007 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)
buyer gets all 6013-02-02-76-50 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works
approx 5/8 thick. 47 lbs net weight013-02-02-58/850 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works
YOU ARE BIDDING FOR ONE MASKING PLATE, FITS MOST 8" SUPER SPACERS, 6-13/16 OD, 3-1/4" ID, 2 bolt holes 4-1/2" apart. I have 2,2,2,3,3,4,4,4,8,8 and 12 notch plates remaining YOU ARE BIDDING FOR ONE PLATE 012-08-04-19/040 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect
REAR MASKING PLATE COVER FITS MOST 8" SUPER SPACERS012-08-04-19/040 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works
8" cam action drill press vise, works great. 014-09-09-ap#3 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)
8" cam action drill press vise, works great. 014-09-09-ap#2 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)
8" cam action drill press vise, works great. 014-09-09-ap PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)
you are bidding for one vise handle, make your selection when making your payment. long one is marked with kurt brand d80-24a, 7/8 hex, shorter one is marked 80-24 with no brand name. both are 7/8 hex you are bidding for one014-03-01-24.651 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect
hand held heat sealing iron adjustable thermostatically controlled temp up to 800 degrees, 6" x 3" metal platen. works great. if the listing says 2 available, you get the one in photo 1, if the listing says 1 available, you get the one in photo 2.
USED, VERY GOOD CONDITION VARIABLE SPEED MOTORIZED ROOFING SEAM HOT AIR WELDER. WORKS GREAT, VARIABLE TEMP AND SPEED, 220V TWIST LOCK PLUG , WITH METAL CASE. BUYER PAYS UPS SHIPPING ON 150LBS FROM 30527 014-011-01-45-714C PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below:
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
