PARKER FULFLO STAINLESS STEEL CARTRIDGE FILTER MODEL NO. : WYFSS-10-2 INLET / OUTLET : 2" NPT LISTING IS FOR HOUSING ONLY, NO HARDWARE, SPRINGS, OR FILTER IS INCLUDED. NOTE : ITEM IS NEW, BUT HAS LIGHT NICKS AND SCRATCHES FROM TIME ON STORAGE ROOM SHELF, WHICH DO NOT AFFECT USABILITY.
Parker Veriflo 930Y High Purity Manifold Valve, three port, air operated, NC, 316L SS body, 1/4" face seal female (swivel) x 1/4" face seal female (swivel) x 1/4" face seal female (swivel), PCTFE seat, 4.06" x 2.66" gland-to-gland Parker Hannifin Corporation’s Veriflo Division presents the 930Y, a diaphragm valve engineered to meet the specific requirements of semiconductor OEM tool manufacturers. The 930Y is a
300 series brass quick connect couplers with 1/2” Push-Lok 90 degree hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 300 series male brass plugs. The S-318PL barb and coupler are oriented at a 90 degree angle from each other and should be used with a Push-Lok hose ID of 1/2’’.
200 series brass quick connect couplers with 3/8” Push-Lok 45 degree hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 200 series male brass plugs. The S-226PL barb and coupler are oriented at a 45 degree angle from each other and should be used with a Push-Lok hose ID of 3/8’’.
300 series brass quick connect couplers with 1/2” Push-Lok 45 degree hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 300 series male brass plugs. The S-328PL barb and coupler are oriented at a 45 degree angle from each other and should be used with a Push-Lok hose ID of 1/2’’.
200 series brass quick connect couplers with 3/8” Push-Lok 90 degree hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 200 series male brass plugs. The S-216PL barb and coupler are oriented at a 90 degree angle from each other and should be used with a Push-Lok hose ID of 3/8’’.
We have one Parker PTFE pneumatic pump available. The pump is in good condition and will be chemically hard cleaned to remove organic, metallic and particulate contamination. We flush the pump with 18 Meg Ohm DI water and seal it in a plastic bag within a class 100 cleanroom for shipment
The IR4000 Series regulator offers high pressure capability with an inlet pressure up to 4,000 psig. The large convoluted Hastelloy C-22® diaphragm provides stable pressure control over the operational range of the regulator. Close tolerances and tight alignment of moving components minimize hysteresis and improve cycle life.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
