parts for vise for sale, brand-new and used.

THE ADD VISE Package #3 Starter Upgrade - $3450.00 This package includes our leveling head, all applicable hardware, clamping blocks (2), granite surface plate and “ T “ wrench

"Click here to view my full range of products" Can you switch from one job to the next in seconds? You can with the Neu Vise 1000. Want to move a job from one machine to another in seconds?

Wilton 350 vice that needs repair on rear of vise on main body and end cap has a piece broken off. Some welding repair could bring it back to life I suppose. Vise closes just fine however with end cap in current condition the vise pushes the end cap and threaded rod back and does not open the jaws as it should, you have to physically pull it open, it is old so all internal parts need to be cleaned and re-lubed.

* * * Here is Wilton Bullet 350S Vise that has been fully restored, anvil milled, polished & freshly painted, comes with new old stock Soft Copper Jaws. Made in USA. * * * Jaw width: 3 1/2" wide.

Gibraltar Angle Vise Jaw Width - 4” Opening Capacity - 4” Throat Depth - 1-3/4” Base

Vintage Scout bench vise for parts or repair

(20) C&K SPDT PUSHBUTTON SWITCHES BOARD MOUNT 1P2D SWITCHES + PUSH-ON/GRIP NUTS (PANEL MOUNTS) TEMP-ON PB SWITCHES, 120VAC, 1A New old stock (NOS). SPDT Pushbutton Switches, Temporary-ON PB Switches, Board Mount, 120VAC, 1A, C&K. Switch body is about 3/8" on each side.

Up for auction is a very heavy LOT of machinist tools. They are very heavy. I really don't know much about most of them.

Self-centering, extra-wide opening jaws open a full 9-Inch (228.6mm) and hold heavier objects by centering weight over base Parts Tray Base Mount adds stability [8.5 (215.9mm) diameter] and has six individual trays to neatly hold small parts and tools Ribbed, neoprene jaw pads are 1.875 (47.6mm) high x 1.5 (38.1mm) wide and provide a sure grip Height: 7.875 (200mm), Weight: 5.0 lbs. (2.3kg) Product Description PanaVise is a major manufacture of Vises and Work Holding Tools.

The Tucker Vise by Veritas® - E

Vise does not have any identifier on it. But the front looks so much like a Wilton to me. But I can’t say for sure what it is.

Office: 830-775-2580 Our Asset #:KSCU / 103 Qty available:1 CARDINAL 7B SPEED VICE Milling Vise Model #7BV- 6" Jaw Width Gallery Photo

8" cam action drill press vise, works great. 014-09-09-ap#3 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)

8" cam action drill press vise, works great. 014-09-09-ap#2 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)

8" cam action drill press vise, works great. 014-09-09-ap PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)

Starrett Grind Vise Direct from the toolroom of a (now defunct) Fortune 500 company and never ever used or even unwrapped None better --none cheaper --check my prices against those of others --Why ??? I actually sell stuff Don't like my price ?? Consider MSC @ 1323.00 or $1227 @ Mytoolstore POOP Hardened steel Ground flat, square, and parallel within .000

you are bidding for one vise handle, make your selection when making your payment. long one is marked with kurt brand d80-24a, 7/8 hex, shorter one is marked 80-24 with no brand name. both are 7/8 hex you are bidding for one014-03-01-24.651 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect