pipe sleeve clamp for sale, brand-new and used.

An adjustable squeeze-off clamp for controlling the flow of a material flowing in a relatively soft-walled conduit is provided. The clamp broadly includes a static jaw, a moveable jaw with an associated adjustment member, and an over-the-center operating linkage, including an operating lever, operably connecting the jaws. The gripping surfaces of the jaws are rounded to prevent damaging the workpiece.

These no hub couplings are designed to join cast-iron pipe and fittings in drains, waste and vent (DWV) applications. Each coupling includes two components.

Dixon 179-0606 Brass Hose Splicer Fitting, Tee, 3/8" Hose ID Barbed This Dixon 179-0606 brass hose splicer tee fitting is suitable for joining three hoses. This tee fitting is T-shaped and has three openings to connect and branch three hoses, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C.

Anderson Metals Brass Hose Fitting, Connector, 5/16" Barb x 3/8" Female Pipe Size: 5/16" Barb x 3/8" NPT Female This Anderson Metals hose fitting is made of brass and connects hose to threaded pipe conforming to the National Pipe Thread (NPT) standard. This adapter is for a fixed connection between plastic or rubber hose and pipe made of copper, nylon, or plastic.

Anderson Metals Brass Hose Fitting, Connector, 1/2" Barb x 1/2" Female Pipe

This auction is for mixed surplus lot of brand new SAFEWAY quick disconnect couplers. Get an amazing deal of these parts valued at over $30,000.00. I am happy to answer any questions you may have.

You are buying ONE (1) Fernco 3 inch to 3 inch rubber coupling.. new still with the original wrapping and instructions

550 GPM High Pressure/Low Volume Pump, Max Flow 550 GPM Max Pressure 100 PSI Suction: 4" Male NH Thread Discharge: 2-1/2" Male NH Thread Swivel valves swings 175 degrees for ease of hose layout Typical pump performance from 5 foot draft at sea level: 90 GPM @ 100 PSI, 340 GPM @ 50 PSI, and 460 GPM @ 25 PSI. Pump

SHAFT ALIGNMENT DIAL INDICATOR ROLLER CHAIN JIG MILLWRIGHT & MAINTENANCE IT'S ON EVERY MILLWRIGHT AND MAINTENANCE TOOL LIST A TRUE CRAFTSMAN MUST HAVE AT LEAST ONE IN THEIR TOOLBOX NOTE "TWO ARE NEEDED FOR REVERSE AND NEW METHOD OF ALIGNMENT PROCUDURES OVER 35 YEARS OF EXPERIENCE WENT INTO THIS ONE 6061 AIRCRAFT ALUMINUM

4" diameter adjustable sleeve (nipple), without "o" ring, for Nordfab Quick-fit or compatible clamp-together dust collection ductwork. Also includes a 19-23" partial piece (one end cut to use with sleeve) of 4" diameter pipe. Length of partial piece is sellers choice.