plastic conveyor guide rails for sale, brand-new and used.

FEATURES: $195.00 CONVEYOR PRICE IS BASED ON A 1-FOOT SECTION & CAN BE SOLD IN INCREMENTS UP TO 12-FEET LONG 5" wide, 11 gage, 304 stainless steel with 820 chain All stainless steel construction with adjustable guide rails *ENTER THE TOTAL # OF FEET

Pictured is a labeler system comprised of several modules that can configure to your specific need. The modules are such: CONTAINER FEEDER let’s say you are simultaneously filling several containers at the same time and then approach the labeler bunched together. The feeder is designed to separate the containers so they feed the labeler one at a time.

Sonic Air Knife System with Enclosure and Conveyor -Manufacturer: Sonic Air Systems, Brea California -3.75” Wide x 6’ Long Conveyor with 3” Plastic Mattop Belting -Adjustable Conveyor Guide Rails -(2) 18” Long Air Knives mounted on opposite sides of conveyor with adjustable positioning -Conveyor Motor: Electrical 110 Volt, 1 Ph, 60 Hz -5 HP Paxton Air Blower Motor: 208-230/460 Volt, 3 Ph, 60 Hz -(4) Threaded Leveler Legs

You are buying one piece of natural virgin UHMW, brand name tivar 1/8" thick 4" X 48" These sheets have a non-stick, low friction, durable surface that results in the smoothest possible action when used in homemade or factory original jigs, fixtures, and fences. Ultra High Molecular Weight (UHMW) material is a tough, heavy, dense plastic with self-lubricating properties that's great at reducing material to fence friction on router table fences or auxiliary table saw fences.

You are buying one piece of natural virgin UHMW, brand name tivar 1/4" thick 4" X 48" These sheets have a non-stick, low friction, durable surface that results in the smoothest possible action when used in homemade or factory original jigs, fixtures, and fences. Ultra High Molecular Weight (UHMW) material is a tough, heavy, dense plastic with self-lubricating properties that's great at reducing material to fence friction on router table fences or auxiliary table saw fences.

Hello, up for bid is a nice heavy duty plastic rexnord style top Stainless Steel, feeder/accumulation conveyor. This unit is surplus to our operations. The dimensions are as follows length is 115", Width is 61.5" and Height is adjustable 38.5" plus or minus 3".

Inline Filling Systems Inline Capper with Elevator Sorter/Feeder -Manufacturer: Inline Filling Systems Inc., Venice Florida -Model: CAPPER NT 4X -Serial Number 10884 -

Approximately160 FT of AMT 4 1/2" PET Vacuum bottle conveyor. Designed for flat oval style PET plastic bottles. Has quick change corners ( seven 90 deg corners) has all Value guide adjustable side rails.

You are buying one sheet of 1"x 7" x 5.25" uhmw Nominal thickness of 1" Actual thickness may be a little over 1" thick UHMW is ultra high molecular weight (UHMW) polyethylene sheet that has exceptionally high abrasion and impact resistance properties. It will outwear all other materials, including metals, nylons, urethanes and fluoroplastics. In corrosion resistance, it has the same qualities of other polyethylene plastics.

You are buying one sheet of 1/4"x 12" x 8.50" uhmw Nominal thicknest of 1/4" Actual thickness may be a little over 1/4" thick UHMW is ultra high molecular weight (UHMW) polyethylene sheet that has exceptionally high abrasion and impact resistance properties. It will outwear all other materials, including metals, nylons, urethanes and fluoroplastics. In corrosion resistance, it has the same qualities of other polyethylene plastics.

Spare inventory from a machine build. Purchased new October 3, 2011 and been in storage. There may be some small blemishes on the surface and some corners are dinged from handling (see photos) but very good condition.

You are buying one piece of natural virgin uhmw, brand name tivar 1/4" thick Most engineering plastics (uhmw,Nylon, Delrin, Teflon, etc.)are sold "thick" - standard tolerances are -0.0", +5% because the machinist needs the extra material for exactness 21" x 20" UHMW is ultra high molecular weight (UHMW) polyethylene sheet that has exceptionally high abrasion and impact resistance properties. It will outwear all other materials, including metals, nylons, urethanes and fluoroplastics.

****Lot of 4 Heavy Duty stainless steel angle bracket or L bracket, very similar to Valu-Guide part # VG-205-E-14-SS. Bracket is 7.75" x 3.25" long and 1.5" wide, 1/4" thick, type 304 series stainless steel. Bracket can be used to mount conveyor siderail, beaded rails, photo eyes, reflectors, etc.

****Lot of 10 Heavy Duty stainless steel angle bracket or L bracket, very similar to Valu-Guide part # VG-205-B-14-SS. Bracket is 3.25" x 3.75" long and 1.5" wide, 1/4" thick, type 304 series stainless steel. Bracket can be used to mount conveyor siderail, beaded rails, photo eyes, reflectors, etc.

Heavy Duty stainless steel angle bracket or L bracket, very similar to Valu-Guide part # VG-205-D-14-SS. Bracket is 5.3" x 3.25" long and 1.5" wide, 1/4" thick, type 304 series stainless steel. Bracket can be used to mount conveyor siderail, beaded rails, photo eyes, reflectors, etc.

Heavy Duty stainless steel angle bracket or L bracket, very similar to Valu-Guide part # VG-205-E-14-SS. Bracket is 7.75" x 3.25" long and 1.5" wide, 1/4" thick, type 304 series stainless steel. Bracket can be used to mount conveyor siderail, beaded rails, photo eyes, reflectors, etc.