plastic conveyor rollers for sale, brand-new and used.

NEW standard duty 1.9" diameter conveyor rollers. Mathews 29000 brand. 30" long ( 29-7/8" bearing to bearing, 31-1/4" shaft length).

You are buying one piece of natural virgin UHMW, brand name tivar 1/8" thick 4" X 48" These sheets have a non-stick, low friction, durable surface that results in the smoothest possible action when used in homemade or factory original jigs, fixtures, and fences. Ultra High Molecular Weight (UHMW) material is a tough, heavy, dense plastic with self-lubricating properties that's great at reducing material to fence friction on router table fences or auxiliary table saw fences.

You are buying one piece of natural virgin UHMW, brand name tivar 1/4" thick 4" X 48" These sheets have a non-stick, low friction, durable surface that results in the smoothest possible action when used in homemade or factory original jigs, fixtures, and fences. Ultra High Molecular Weight (UHMW) material is a tough, heavy, dense plastic with self-lubricating properties that's great at reducing material to fence friction on router table fences or auxiliary table saw fences.

2437UD10A.1.93 New Unknown Forged Steel 38mm Brackets, or Arms, or Hitches, or Drawbars, or ?, Part Number 3704701, or 61-00006-29. Each bid quantity is for a Lot of Four (4) Pieces. You may bid / buy any number of lots, up to the total quantity available above.

NEW tapered conveyor rollers. Steel. 15-1/2" long.

1/4" thick x 4" wide x 120" long Black Reprocessed UHMWPE Wear Strip Width Tolerance: ±.125" Length Tolerance: +.5"/-.125" -Coiled for shipping TIVAR ECO This grade, partially composed of reprocessed PE-UHMW material, has an overall lower property level than the virgin TIVAR 1000. Our TIVAR ECO grade shows a favorable price-performance ratio for applications in many kinds of industries with less demanding requirements.

You are buying one sheet of 1"x 7" x 5.25" uhmw Nominal thickness of 1" Actual thickness may be a little over 1" thick UHMW is ultra high molecular weight (UHMW) polyethylene sheet that has exceptionally high abrasion and impact resistance properties. It will outwear all other materials, including metals, nylons, urethanes and fluoroplastics. In corrosion resistance, it has the same qualities of other polyethylene plastics.

You are buying one sheet of 1/4"x 12" x 8.50" uhmw Nominal thicknest of 1/4" Actual thickness may be a little over 1/4" thick UHMW is ultra high molecular weight (UHMW) polyethylene sheet that has exceptionally high abrasion and impact resistance properties. It will outwear all other materials, including metals, nylons, urethanes and fluoroplastics. In corrosion resistance, it has the same qualities of other polyethylene plastics.

You are buying one piece of natural virgin uhmw, brand name tivar 1/4" thick Most engineering plastics (uhmw,Nylon, Delrin, Teflon, etc.)are sold "thick" - standard tolerances are -0.0", +5% because the machinist needs the extra material for exactness 21" x 20" UHMW is ultra high molecular weight (UHMW) polyethylene sheet that has exceptionally high abrasion and impact resistance properties. It will outwear all other materials, including metals, nylons, urethanes and fluoroplastics.

Lot 3 New Stainless Steel Conveyor Rollers 15.5" x 1-3/8" For Use Between 16" Frames Lot 3 New Steel Conveyor Rollers 15.5" x 1-3/8" For Between 16" Frame. Shaft: 1/4" Round 304 Stainless Steel Kendale Bearings Diameter (In.): 1-3/8 Shipping in the USA $8.95 Thanks for looking

THIS IS A BUY IT NOW FOR 1 NEW STEEL CONVEYOR ROLLER . THESE ARE QUALITY ROLLERS BUILT WITH MILLER BEARINGS. 17 1/4 INCHES IS THE LENGTH OF THE ROLLER FACE.