plenum coil for sale, brand-new and used.

22 gauge 2 conductor stranded cable plenum 100 foot coil or multiple up to remaining

SPRING BLOWOUT SALE!! This is an American Made Water to Air Heat Exchanger. Limited Supply!

SPRING BLOWOUT SALE!! This is an American Made Water to Air Heat Exchanger. Limited Supply!

14x10/ 56,000 BTUs / 100 PSI For use in your hot air furnace plenum. Other sizes available.

Water-to-air heat exchanger coil with straight 3/4" FPT outlets.Used in forced-air furnaces with plenum size of approximately 17" x 18".Dimensions: 16-1/2" x 19" x 4-1/8".p/n 106

Water-to-air heat exchanger coil with straight 3/4" FPT outlets. Used in forced-air furnaces with plenum size of approximately 24" x 24".Dimensions: 24" x 26" x 4-1/8".p/n 111

Water-to-air heat exchanger coil with straight 3/4" FPT outlets.Used in forced-air furnaces with plenum size of approximately 20" x 20".Dimensions: 19" x 21" x 4-1/8".p/n 108

Water-to-air heat exchanger coil with straight (p/n 107) or 90-degree (p/n 704) 3/4" FPT outlets. Used in forced-air furnaces with plenum size from approximately 18" x 18" to 18" x 20".Dimensions: 17-3/4" x 20" x 4-1/8".p/n 107 Heat Exchanger Coil, 125k Btu, straight outletsp/n 704 Heat Exchanger Coil, 125k Btu, 90? outlets

Water-to-air heat exchanger coil with straight 3/4" FPT outlets. Used in forced-air furnaces with plenum size of approximately 23" x 23".Dimensions: 22-3/4" x 24" x 4-1/8".p/n 110

Water-to-air heat exchanger coil with straight 3/4" FPT outlets. Used in forced-air furnaces with plenum size of approximately 13" x 18".Dimensions: 12-3/4" x 18" x 4-1/8".p/n109

HONEYWELL VALVE ACTUATORS for FAN Coil ***SPECIFY MODEL WHEN ORDERING VU444A1155 - 120V NO NICKEL PLATED VU844A1087 -24V VU843A1060 -24V VC8111 - 24V VC4011 - 120V VALVES AVAILABLE FOR ALL MODELS ********OTHER MODELS AVAILABLE******* VU MODELS Overview The humidity resistant, Fan Coil Valve Actuators are used in conjunction with VU52, VU53 and VU54 valves for controlling the flow of hot or chilled water in commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors.

This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air.

2 element cable, 22 gauge 6 conductor stranded foil shielded and 16 gauge 2 conductor stranded, makes for a flat cable appx. 7/16" wide 100 foot coil or multiple for continuous length, weighs 6 pounds per 100 ft

Functional Devices relay in a box. Model No. RIBU1C.

2011 Trane Precedent Commercial Forced Air Furnace with Cooling Unit **This furnace has been professionally removed, covered, and on a trailer waiting to be towed away by it's New owner!** TRANE COMMERCIAL FURNACE

Snowbird Environmental Systems Corp A/E 32C-45A 36K BTU / 3 Ton Heat Pump 208 Volt 50/60 HZ AC HVAC These units were to be used for HVAC training and have never been deployed. They currently cost $11,508.94 each and we have three units available, you could install all three for much less than the cost of one.

Water-to-air heat exchanger coils with straight 3/4" FPT outlets. Used in forced-air furnaces with plenum size of approximately 15" x 18".Dimensions: 15" x 20" x 4-1/8".p/n 102