pole bracket for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

Airpax LMLK1-1RLSR-52-30.0-01 circuit breaker with alarm contacts for common, normally open, and normally closed 30 Amp DC circuit breaker was previously installed in equipment but never had power connected to it, comes with insulator, #6 AWG (blue) lug and bracket. This is a circuit breaker for use in low voltage DC applications.

Airpax LMLK1-1RLSR-52-30.0-01 circuit breaker with alarm contacts for common, normally open, and normally closed 30 Amp DC circuit breaker was previously installed in equipment but never had power connected to it, comes with #6 AWG (blue) lug and bracket This is a circuit breaker for use in low voltage DC applications. Manufactu

Clearfield Small Count Delivery Case Fiber Optic Drop Case - Part # SCD-CASE-6 New condition, recovered from a freight mixup. I have 4 available, 3 are still in factory boxes. First 3 buyers will get in the factory box units.

WHITE RODGERS 120-106131 TYPE 120 SPNO Single Pole Normally Open Contact, Dust Resistant, Water Resistant and Case is Isolated from Bracket Specifications Dimensions: 2.13" L X 2.88" W X 3.09" H Temperature Range: Intermittent Duty -20°F to 150°F Temperature Range: Continuous Duty -20°F to 120°F Terminals: Contact 5/16"-24 Studs, .495" Minimum Lenght Terminals: Coil #10-32, .451" Minimum Lenght Recommended Mounting: Coil Terminals up or Horizontal Hardware Torque Contact Terminal: 45-55 in.

WHITE RODGERS 120-105711 TYPE 120 SPNO Single Pole Normally Open Contact, Dust Resistant, Water Resistant and Case is Isolated from Bracket Specifications Dimensions: 2.13" L X 2.88" W X 3.09" H Temperature Range: Intermittent Duty -20°F to 150°F Temperature Range: Continuous Duty -20°F to 120°F Terminals: Contact 5/16"-24 Studs, .495" Minimum Lenght Terminals: Coil #10-32, .451" Minimum Lenght Recommended Mounting: Coil Terminals up or Horizontal Hardware Torque Contact Terminal: 45-55 in.

Bracket, Cutout, Arrester or Pothead, for mounting one unit of apparatus to pole. Vertical member can be mounted running either up or down the pole. Can be combined with C206-0190 strap for mounting two apparatus units

Signworld Display Wholesale SKU: PSP18 Product summary: Aluminum Cast Base made to fit square, round, or multi-sided poles. Banner is NOT included. Strong and durable fiberglass rods with end caps to secure your banner.

In this lot is excess equipment to our needs. Used on site for the past month and a bit and working fine. The lot includes: 1x Trimble R6 Model 3 GPS receiver, with 2x Trimble 2.4Ah 7.4V Batteries 1x Battery Charger 1x Radio Antenna for R6 1x Yellow Pelican Case.

Phoenix Measurement Solutions Your Measurement Solution Source!

Phoenix Measurement Solutions Your Measurement Solution Source!

This auction is for: Seco Receiver bracket P/N 5198-161 It holds Leica 1200 Receiver on the pole The 5198-161 bracket's pole clamp fits poles from 1-to-1.25-inch diameters. It features an open clamp design for easy installation and removal from the pole. Constructed of machined aluminum and anodized black.

NEW SECO Range Pole Bracket for Trimble TSC3 Ranger Description: 100% Brand new and top quality Trimble TSC3 and Ranger Rubber 3M protectors included

Bob Hughes Display Swooper Flag. Purchased in April 2014 for $101.05. This is a 10 foot swooper flag in black with yellow and red lettering.