ring nut for sale, brand-new and used.

ISO 30 ER32 Collet Chuck Tool Holder Balanced to 20,000 RPM This is a brand new unused collet that I purchased here on eBay that ended up being the wrong size. Product features: Dynamically balanced to 20,000RPM at G2.5 by Haimer balancing machine at all location for consistent balance Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification. On the side of flange a flat is cut to compe

Item was bought at an estate sale. Starrett 440-6 Vernier Depth Gauges 0-6" INCH Micrometer Type and comes in original protective case. USED; VERY GOOD CONDITION; NO PERSONAL MARKINGS STOCK#: 440 MADE IN USA The Starrett 440Z Vernier Depth Gauges, Lock Nut (no Ratchet Stop), Micrometer Type, Inch, have a measurement range of 0 to 6", a resolution (or smallest graduation interval) of 0.001"; with + or – 0.0001" of accuracy.

This shank is 4-1/8" long measured from the end of the threading to the end where the faucet attaches. The shank comes with a black plastic flange on the front and a compression ring on the back. Forged brass lock nut.

Kegco SHANK4-ASC - All SS Contact 4 1/8" Long Beer Shank with Nipple Assembly - 1/4" I.D. Bore Product Features

New Starrerrt Precision Micrometer 436.1RL Top quality USA made tools Tapered frame for measuring narrow slots and tight spaces Vernier scale in inch units for taking precise outside diameter (OD) measurements Ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurements Satin chrome finish on thimble and sleeve helps resist rust and reduce glare Micro-lapped steel measuring faces help provide accuracy .001" Grad Ratchet Stop Lock Nut hbo.

223/5.56 Mil Spec Barrel Nut Same as the stock barrel nut under the delta ring Constructed out of steel Mil-Spec One year warranty

I have approximately 150 EA of brand new, never used plastic tie rod, end caps or threaded bar nut caps. They are intended to attach on to an end of a threaded bar and seal/fill with grease so the metal bar will not corrode. These caps have removable plugs so that cert fittings can be added if necessary.

COOPER NUT SCREW WITH SMALL O-RING SOLVENT RESISTANT TO SEAL ink filter damper AND INK LINE TUBING ON LARGE FORMAT PRINTERS MIMAKI/ROLAND. USED ON DX4 SMALL DAMPERS ROLAND SC SERIES, MIMAKI JV3 USING SMALL DX4 DAMPERS. O-RING INSIDE DIAMETER = 2 mm O-RING OUTSIDE DIAMETER = 3.6 mm 1 COOPER NUT SCREW 1 O-RING · Item is guaranteed to be in condition stated in the store description.

ELECTRICAL_PARTS FREE shipping

ELECTRICAL_PARTS FREE shipping MORE INFO

ELECTRICAL_PARTS LOT OF 10 PCS

ELECTRICAL_PARTS FREE shipping