"Hot Stamp Supplies for us Little Guys" Reclaimed from old Kingsley cardboard canisters, 35 feet long, which will now work in an aluminum canister (not included) with the Kingsley auto foil feeder. Remember that most rolls from Kingsley are 40 feet or less.
"Hot Stamp Supplies for us Little Guys" Mosaics and Rainbows (or virtually any foil with a design) are available at considerably higher cost than single colors foils. This foil is hand-rolled down, from large master rolls, to 100 feet in length so t
"Hot Stamp Supplies for us Little Guys" Please Note: this foil is hand-rolled down, from large master rolls, to 100 feet in length so they will work in a canister with the Kingsley auto foil feeder. Remember that most rolls from Kingsley, Howard, Jason, etc. are less than half as long at 40 feet.
"Hot Stamp Supplies for us Little Guys" This foil is hand-rolled down, from large master rolls, to 100 feet in length so they will work in a canister with the Kingsley auto foil feeder. Remember that most rolls from Kingsley, Howard, Jason, etc. are less than half as long at 40 feet; ours are 100 feet long.
.8mm thick .031 or .032 about in inches MELTS a little lower, very easy to work with, perfect for soldering electronic component boards! 1oz AS PICTURED! hand rolled , not perfectly wound, but very easy to use!......so we can sell it cheaper, as pictured.
Tin Plated Copper Shell Starter Motor Commutators - Lot of 100 - 412E-10 - 10Bar.See Print for full Commutator Specifications.Contact us for any of your Commutator needs. We can provide ALL types. Quality and service second to none.Let us know if you have any questions.www.toledocommutator.com Molded Shell Air Gap Commutators
Copper Commutator - 3 bar - M141431 - for Slot Cars - Lot of 100 Pieces. See Print for full Commutator Specifications.Contact us for any of your Commutator needs. We can provide ALL types.
This is just a roll of copper tubing. It is 1/4" across, and not sure how long it is. The way it is rolled up it measures 3" across at the bottom of the behive and 5 1/2" at the top.
Description The ratcheting cable cutter by Klein Tools features a high leverage ratchet mechanism for single-handed cutting of copper and aluminum cables, leaving no burrs or sharp edges. Features High leverage ratchet mechanism for single-handed cutting of copper and aluminum cables, leaving no burrs or sharp edges. Patented two-step ratchet mechanism requires fewer strokes per cut.
16oz copper 18"x120" We have sheets and coil so any length is possible. Ships rolled. Might have a few light surface scratches from handling. Inquire about custom width and lengt
Rolled edges & extruded holes Heavy- gauge, copper bonded steel Positions copper water supplies for sinks, water closets, and other fixtures 1/2", 3/4" & 1" holes Designed to position copper water supplies for sinks, lavatories, and other fixtures
(25) 1/2" C x 1/2" C Copper Couplings w/stopCopper Couplings are used to connect two copper pipes in a straight line. This copper coupling feature a rolled stop, which prevents the pipe from sliding past the center of the coupling.PRIORITY SHIPPING!
WE WILL SEND YOU 1 EACH TWECO NOZZLES WS24A-50. Item Details Tweco® Weldskill 24A Series Nozzle with 1/2" bore size is designed for standard gas diffuser and perfect for protecting the quality of your welds as well as the life of your gun. 3.42" Nozzle with 0.875" OD is ideal for use in medium to heavy duty welding application up to 450 A.
Unused, Reading USA, Camlee ACR, 1/2 ”, 25 foot, soft copper, refrigeration tube, tubing, piping, plumbing, part, replacement lines. The piping shows some wear including scratches, discoloration, staining, and some tarnishing found. The piping is marked, “USA Camlee ACR”, in multiple places.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.