RTS Telex BP-325 - Portable Beltpack - 2 channel - Intercom Headset Station, US $300.00 – Picture 0

RTS Telex BP-325 - Portable Beltpack - 2 channel - Intercom Headset Station, US $300.00 – Picture 1

RTS Telex BP-325 - Portable Beltpack - 2 channel - Intercom Headset Station, US $300.00 – Picture 2

Rts Telex Bp-325 - Portable Beltpack - 2 Channel - Intercom Headset Station

US $300.00

Pasadena, California, United States
Jun 9th

Open on mobile:
QR code

I have three units total. 1 purchase is for 1 unit. The items pictured are what are available and you can request a certain one assuming it hasn't already been sold. Pulled from working environment but not tested. About 99% certain they're in working order and willing to accept returns if they don't. One unit is missing the knob for volume control so I am willing to accept a lower price for that unit. Please let me know if you have any questions. Features: Call function that allows the user to send or receive call signals to other devices on the intercom channel, including audible call alert on the listen side. Microprocessor-controlled microphone kill detect. Powered externally, via the intercom system power supply on channel one. Headset 4 or 5-pin XLR connection Specifications: Channel Supplied Power Requirements: 30 VDC nominal (standard RTS line), 65 to 85 mA Environmental Requirements: Storage: -20°C to 80°C; 0% to 95% humidity, noncondensing Operating: 0°C to 50°C; 0% to 95% humidity, noncondensing Dimensions: 5" (127 mm) high, 3.75" (96.3 mm) wide, 2.05" (52.1 mm) deep Weight: 0.75 lb (340 g) Exterior: Polystyrene and polycarbonate mix; gray textured main body Impedance Across Intercom Line: 10,000 ohms typical Ambient Temperature Range: Operating: 0° C to 50° C Storage: -40° C to 125° C Noise Contribution to 200 Ohm Intercom Line: -75 dBu Program Input: Maximum input level: +20 dBu Nominal input level: -10 to +8 dBu Frequency response: 100 Hz to 12 kHz, ±3 dB Monaural Dynamic-mic Headset Connector: XLR-4-31 receptacle (J13) Pin 1 - Microphone low Pin 2 - Microphone high Pin 3 - Common Pin 4 - Headphone high Stereo Dynamic-mic Headset Connector: XLR-5-31 receptacle (J14) Pin 1 - Microphone low Pin 2 - Microphone high Pin 3 - Common Pin 4 - Headphone left high Pin 5 - Headphone right high Carbon-mic Headset Connector (J1): 1/4", 3-conductor Phone Jack Used for Headset - Tip - Carbon microphone - Ring - Headphone - Sleeve - Common Used for Mic Switch - Tip - Remote switch normal-open contact - Ring - No connection - Sleeve - Remote switch common Intercom Line Input Connector (J11): XLR-3-31 female receptacle Pin 1 - Common Pin 2 - Channel 1 intercom audio and +DC Pin 3 - Channel 2 intercom audio Line Loop/Aux Connector (J10): XLR-3-32 male receptacle Used for Loop-through: - Pin 1 - Common - Pin 2 - Channel 1 intercom audio and +DC - Pin 3 - Channel 2 intercom audio Used for Program Input: - Pin 1 - Common - Pin 2 - Program input high - Pin 3 - Program input low Used for Remote Mic Switch and/or External Power: - Pin 1 - Common - Pin 2 - +22 to +24 volts DC - Pin 3 - Remote switch normal-open contact

Condition:

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...

Brand

Telex