s cleats for sale, brand-new and used.

AFFORDABLE HVAC MACHINERYAffordablehvac@ymail.com630 465 7183 Visit us online at affordablehvacmachinery.com or email affordablehvac@ymail.com

Please read all details below, here is a quick summary: Item has not been tested, condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing (link at bottom left of listing labeled "Ask a Question").

Please read all details below, here is a quick summary: Item has not been tested, condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing (link at bottom left of listing labeled "Ask a Question").

Zalkin Stainless Steel Incline Cleated Elevator/Conveyor Model: ECT 800 L S/N: 80068 Mfg: 2002 Approx. 16 ft discharge height (adjustable elevator conveyor leg) Hopper: 58"W x 64"L x 34"D (trapdoor in bottom) 8" wide belt with 2" high cleats set 5" apart; approx 172"L 240/480/3 phase Stainless Steel construction Last used in the food industry. Remains in excellent working condition.

Consolidated SS Cap Elevator with SS Hopper, 12" Cleated Incline Conveyor Model FEH-15 Serial #729392 Incline conveyor is 12’ Long SS construction MS legs 12” wide cleated belt – some cleats are broken SS Hopper – 40” x 46” x 28” Deep with SS Top SS discharge chute 0.5 hp / 1750 rpm DC Motor Unit was last used for feeding plastic bottle caps Belt is showing signs of wear Last used in a water bottling plant Good Condition !! For More Information, EMAIL

Incline conveyor with cleats and side wallFood grade belt.All metal is stainless steel.Standing dimensions with chute installed (LxWxH): 129" x 47" x 105".Chute discharge height: 73" (casters can be screwed out for 2-3 additional inches of height).Currently set up for 480v usage. Motor winding is for 230-480 volts, however, the machine will not run on 230 volts as the vfds in the panel are for 480-600 volts.

Empty Bottle Elevator Feeder w/ SS Hopper, Cleated Incline Conveyor SS Hopper and Conveyor 12” wide cleated incline Conveyor 2" high cleats on 12" centers SS Hopper – 42” wide x 60" Long x 36" Deep Clean out access door Lexan covering on conveyor Hinged access top on hopper 68" discharge height Casters and leg levelers 1/3 hp / 1750 rpm DC Motor Unit was last used for feeding empty plastic bottles Last used in a Major Pharmaceutical Plant Excellent Condition !! For More Information, EMAIL

2009 Hoppmann EP08 SS Cap Feeder with Speed Controller Model #EP08/08 Serial #003046 2009 Year of Mfg. Last running ROPP aluminum caps SS Construction 8” cleated belt, 2" cleats on 6" centers SS Hopper - 38" x 40" x 20" Deep Pivoting elevation 96" discharge elevation (adjustable) Low cap sensor Hinged access top on hopper SS

18 Inch Stainless Steel Z Flow Conveyor Infeed belt height is 32 inches. Hopper infeed height is 51 inches.

24 Inch Intralox Belt Z Flow Conveyor Stainless Steel Mfg. by EFM Model DCG 240; s/n 588189 Infeed at 8 inch x 80 inch discharge 2 inch high cleats; 12 inch apart 21 inch useable belt width First leg is 60 inches Second leg is 96 inches Third leg is 20 inches 1/2 hp 208-230/460 Last used in chip line Unit just removed from service and remainsin excellent working condition. Can be adjusted a little for discharge height.

This very rare lockformer has drive dies installed has easy edger on top. Comes with pipe lock dies and all bolts and guides. Which can be installed in about 10 minutes.

Empty Bottle Elevator Feeder w/ SS Hopper, Cleated Incline Conveyor SS Hopper and Conveyor 12” wide cleated incline Conveyor 2" high cleats on 12" centers SS Hopper – 42” wide x 60" Long x 36" Deep Clean out access door Lexan covering on conveyor Hinged access top on hopper 68" discharge height Casters and leg levelers 1/3 hp / 1750 rpm DC Motor Unit was last used for feeding empty plastic bottles Last used in a Major Pharmaceutical Plant Excellent Condition !! For More Information, EMAIL

Consolidated SS Cap Elevator with SS Hopper, 12" Cleated Incline Conveyor Model FEH-15 Serial #729392 Incline conveyor is 12’ Long SS construction MS legs 12” wide cleated belt – some cleats are broken SS Hopper – 40” x 46” x 28” Deep with SS Top SS discharge chute 0.5 hp / 1750 rpm DC Motor Unit was last used for feeding plastic bottle caps Belt is showing signs of wear Last used in a water bottling plant Good Condition !! For More Information, EMAIL

2009 Hoppmann EP08 SS Cap Feeder with Speed Controller Model #EP08/08 Serial #003046 2009 Year of Mfg. Last running ROPP aluminum caps SS Construction 8” cleated belt, 2" cleats on 6" centers SS Hopper - 38" x 40" x 20" Deep Pivoting elevation 96" discharge elevation (adjustable) Low cap sensor Hinged access top on hopper SS

incinnati-Milacron Conveyor Flat-to-Incline, Cleated Belt Style Model: ATLK-12-3-4-40 Year: 2000 / Ref 23419 *Previously Used in a Medical Manufacturing Plant* Capacity: 8'L x 26"W x 56"H Volts: 115 Amps: 2.5 Motor: Vari Drive DC HP: 1/4 Max Load: 50lb Features: 2" High Side Rails, Lapped over Conveyor Belt; Double V Guided, White PVC Belt w/ 1 1/2" Cleats on 18" Centers; Leg Sets 45D Incline from floor; Equipped with: Swivel Castors; 15' Power Cord Location: Hialeah, FL 33010

EMI Trim Line Conveyor Model: ATLK 12-3-4-40 Year: 2010 Width: 12" Direct Drive 1/4 hp 90V DC variable-speed drive No roller chain or sprockets Sealed gear reducer 50 lbs. maximum load Adjustable angle incline 20-45 Double V-guided White PVC Belt w/ 1 1/2" High Cleats 18" centers; 4" High Side Rails; Lapped over conveyor belt Leg sets and swivel castors included Legs are Adj. to 34" Infeed Belt Height Control wiring contained in liquid-tight conduit and connectors