NOTE: The only reason this Item is listed as "For Parts Or Repair" is because of the missing Motor Belt mentioned in the condition description below. To list an Item as "Used" it must function fully when shipped. Because of this we have no choice but to list this as parts or repair despite the fact that the belt replacement is an extremely easy fix.
Read Below before bidding 100 pcsPhillips head sheet metal screwpainted brown1.25 inch These are out of box but newthere seems to be some paint missing on the sides due to being in a large box and rubbing against each other, but it is not visible from the top and for most applications should not be an eyesore. In close up you can see some of what I am talking about. If you want perfectly brown all around the panhead, these are not the right screw for your application.
100 pc M2 Screws, Nuts and Washers SetPhillips Pan head screws 40pc (5pc each): M2x4, M2x5, M2x6, M2x8, M2x10, M2x12, M2x16, M2x18(black)M2 nuts 30pcM2 washer 30pc All are nickel coated except M2x18 screws which is black zinc coated
2898XA2B.32 New Tokyo Byokane #8-32 x 5/16" Trivalent Zinc Plated, Hardened Steel, Short Pan Head Phillips Drive Machine Screws, with Serrated Locking Grip Head. Each bid quantity is for a Lot of One Hundred (100) Pieces. You may bid / buy any number of lots, up to the total quantity available above.
90 pc M2.5 Screws, Nuts and Washers SetPhillips Pan head screws 35pc (5pc each): M2.5x4, M2.5x6, M2.5x8, M2.5x10, M2.5x12, M2.5x16, M2.5x20M2.5 nut 25pcM2.5 flat washer 25pcM2.5 lock washer 5pc Parts are nickel coated. Also see our M2 and M3 screw sets
80 pc M3 Screws, Nuts and Washers SetPan head screws 40pc (5pc each): M3x4mm, x6mm, x8mm, x10mm, x12mm, x16mm, x20mm, x25mmM3 nut 20pcM3 flat washer 20pc All are nickel coated. Also see our M2 and M2.5 screw sets. USPS first class shipping, USA only.
200 PIECES ASSORTMENT IN PLASTIC CONTAINER CONSISTING OF: 4-40 STAINLESS STEEL PHIL FLAT HEAD MACHINE SCREW ASSORTMENT (NOTE - PICTURE SHOWS PHIL PAN HEAD BUT QUANTITIES ARE THE SAME) 25 PIECES EACH X 3/16 X 1/4 X 3/8 X 1/2 X 3/4 25 PIECES EACH HEX NUTS FLAT WASHERS LOCK WASHERS THIS PLASTIC BOX IS APPROXIMATELY 5 1/2 X 3 1/2 X 1 1/4. WE CAN GET 2 OF THESE IN
1618F8B.84 New #10 x 5/8" Self Drilling / Tapping, Phillips (Philips) Fram Head Sheet Metal Screws. Each bid quantity is for a Lot of Two Hundred (200) Screws. You may bid / buy any number of lots, up to the total quantity available above.
220 Piece Machine Screw Set Includes 20 8-32 X 3/4" Slotted Round Head Machine Screws 20 8-32 X 1/2" Slotted 1/4" Hex Head Machine Screws 20 8-32 X 5/8" Slotted Pan Head Machine Screws 20 10-24 X 1/2" Slotted Round Head Machine Screws 20 6-32 X 3/4" Slotted Round Head Machine Screws 20 10-32 X 3/8" Slotted Round Head Machine Screws 20 8-32 X 1/4" Phillips Truss Head Machi
This is for a (Set of 2) #M6-1.0 x 3/4" Pan Head Spanner Snake Eye Machine Security Screws. Made from 18-8 Stainless Steel. Size: M6-1.0 Length: 3/4" (Measurement of entire screw including head from top to bottom)
Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #2 Phillips Drive, M4-0.7 Thread Size, 10 mm Length, Fully Threaded, Import (Pack of 100)
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.