We are "Out of Storage Resale LLC" located in Kittery,ME and we buy items from Storage Unit Auctions, yard sales, estate sales, auctions and private homes. Sometimes locations are musty, dusty, smokey and with pets. They are offered here for resale.
We are "Out of Storage Resale LLC" located in Kittery,ME and we buy items from Storage Unit Auctions, yard sales, estate sales, auctions and private homes. Sometimes locations are musty, dusty, smokey and with pets. They are offered here for resale.
(25) VERSATILE RING LUG TERMINAL CONNECTORS #8/M4 SCREWS/BOLTS/STUDS,18 GA WIRE,JOINTING SLEEVE RARE INTERNAL TOOTH LOCK WASHER RINGS Strip Connectors - You Cut Lugs In Various Lengths as You Need New old stock (NOS). Rare, versatile Internal Tooth Lockwasher Ring Lug Crimp/Solder Terminal Connectors. Ring lugs are non-insulated bare open-sleeve (jointing sleeve).
Machinist Lathe Adapter Tool Holder Lot Some have disoloration / rust Morse Taper No 2 end to 13/32" OD round end with 1/4-20 threaded center Quantity 2 Vermont 15/32" HS CO USA drills No 1 morse taper 4 3/8" long Quantity 2 Union Twist Co Morse 1 to 2 One No 1 wedge drill remover Morse 2 to jacobs chuck 2 adapter Morse 2 to jacobs 4 ?? adapter Morse 3 to 4 sleeve Chicago Latrobe Unknown driver ?? with set screw at one end Unknown morse 2 to 13/16" OD 9/16" ID round end
FIREYE UV-EYE PHOTOEYE SENSOR 45UV3 10509102FIREYE PHOTOEYE SENSOR45UV3CATALOG # 105091023/4" SLEEVE/SET SCREW MOUNTIt has been moved in a metal tool box awhile and moved from one storage spot to another for years.it looks like its used ? from scratches and dents >so I checked it . It passes all test ready for work.
SpecSeal Ready Sleeve 2" Firestop Sleeve Made in USA Contains 2" sleeve, escutcheon plates, gaskets & putty This product is designed for new cabling installation in walls or floors up to 10" (250MM) thick. When installed, sleeve should be positioned at the approximate midpoint of the barrier and extend an equal distance from both sides. Tools needed: Phillips screw driver & appropriately sized hole saw (gypsum board) or core
The Aspire Nautilus Hollowed Out Stainless Steel Sleeve replaces the original pyrex glass tube of the Nautilus 5ml to create an amazing look. The Aspire Nautilus Hollowed Out Stainless Steel Sleeve can be screwed on the nautilus base (with the nautilus coil) - this sleeve contains the air tube inside to screw the coil on and it also has a glass tube inside to preserve the pure flavor of your eLiquid.
Product Name 9 Piece Manual Sleeve Puller Set Features and Benefits: Manually operated, screw-powered device removes cylinder sleeves from most truck, bus and tractor engines Handles wet and dry sleeves, you won't need to remove head studs The puller enables one technician to handle sleeve pulling tasks Not recommended for MACK engines Length: 34 " Width: 8.5 " Height: 3 " Item Weight: 25.75 lbs Seller Terms & Conditions 1. Shipping • Shipping charges: Standard shipping is FREE!
New temperature controller with panel retaining sleeve and screw terminal socket. Model number PXR4RES1-5V0A1. I had these connected and working for 1 day to check operation.
NEW CHEMGLASS CG-2077-G-21 Stirrer Bearing, 24/40 Joint 30 DAY SELLER WARRANTY! STIRRER BEARINGS, CHEM-VAC, PTFE NEW Chem-Vac PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. Two versions of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that is molded to the lower portion of the inner joint.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
