+ Post new Ad
Set OF Large Eclipse V Blocks, US $170 – Picture 0
Set OF Large Eclipse V Blocks, US $170 – Picture 0

Set Of Large Eclipse V Blocks

US $170

  • Uxbridge, Massachusetts, United States
  • Jun 13th
Open on mobile:
QR code
This is a pair of Eclipse brand V blocks. Each block is 7-1/8" X 5" X 2-1/2". Top quality Eclipse brand, made in England. Their size number is 215. Current new price is $500.00 + shipping per pair. These are in very good or better condition. http://www.caulfieldindustrial.com/p/eclipse-v-blocks/p-124554 Simple guarantee - If you don't like them return them, UNUSED, for a full refund. Buyer is responsible for return postage.

Directions

Similar products from Supporting Blocks & Sets

SPI 13-819-8 SPI Deep Throat Micrometer 1" Range, 6" Deep

SPI 13-819-8 SPI Deep Throat Micrometer 1" Range, 6" Deep

  • Glenview, Illinois, United States
  • Jun 13th
Pair of Heavy Cast Iron Precision Parallels

Pair of Heavy Cast Iron Precision Parallels

  • Rockland, Massachusetts, United States
  • Jun 13th
Pair of Precision Cast Iron Parallels 10" x 1 7/8" x 3 1/2" High

Pair of Precision Cast Iron Parallels 10" x 1 7/8" x 3 1/2" High

  • Rockland, Massachusetts, United States
  • Jun 13th
52-772-1 SPI 2-4-6 Block Set

52-772-1 SPI 2-4-6 Block Set

  • Palatine, Illinois, United States
  • Jun 13th
LOT OF FIVE BROWN & SHARPE V-BLOCK CLAMP FOR USE WITH 750 TYPE BLOCK

LOT OF FIVE BROWN & SHARPE V-BLOCK CLAMP FOR USE WITH 750 TYPE BLOCK

  • Las Vegas, Nevada, United States
  • Jun 13th
2 MATCHED V-BLOCKS & CLAMPS size 1-5/8" x1-3/4" machinist tools *E

2 MATCHED V-BLOCKS & CLAMPS size 1-5/8" x1-3/4" machinist tools *E

  • Thomaston, Connecticut, United States
  • Jun 13th
Starrett V Block And Clamp No. 567

Starrett V Block And Clamp No. 567

  • Mechanicsville, Maryland, United States
  • Jun 13th
MACHINIST FISHTAIL V-BLOCK WITH CLAMP

MACHINIST FISHTAIL V-BLOCK WITH CLAMP

  • Cape Neddick, Maine, United States
  • Jun 13th
Two Brown & Sharpe V-Blocks #749A

Two Brown & Sharpe V-Blocks #749A

  • Saint Louis, Missouri, United States
  • Jun 13th
8" Long Riehle Machinist Block #7001

8" Long Riehle Machinist Block #7001

  • Saint Louis, Missouri, United States
  • Jun 13th
Starrett No. 271C Drill Blocks & Clamp Excellent

Starrett No. 271C Drill Blocks & Clamp Excellent

  • Yorktown, Indiana, United States
  • Jun 13th
machinist tools

machinist tools

  • Ventura, California, United States
  • Jun 13th
Right Angle Machinist Setup Block

Right Angle Machinist Setup Block

  • Cape Neddick, Maine, United States
  • Jun 13th
MACHINIST V BLOCK and SQUARE GAGE BLOCK

MACHINIST V BLOCK and SQUARE GAGE BLOCK

  • Atlanta, Georgia, United States
  • Jun 13th
LOT OF 3 PRECISION V BLOCKS W/ CLAMPS BROWN & SHARPE 748-11

LOT OF 3 PRECISION V BLOCKS W/ CLAMPS BROWN & SHARPE 748-11

  • Ellington, New York, United States
  • Jun 13th
Grizzly T23889 V-Block Set with Clamp-Double Slot New

Grizzly T23889 V-Block Set with Clamp-Double Slot New

  • Las Vegas, Nevada, United States
  • Jun 11th
VINTAGE V BLOCK MACHINST TOOLS (PAIR) AND BONUS TOOLS

VINTAGE V BLOCK MACHINST TOOLS (PAIR) AND BONUS TOOLS

  • Grant, Alabama, United States
  • Jun 11th
Machinist Gunsmith Bench Block Toolmaker Round Knurled

Machinist Gunsmith Bench Block Toolmaker Round Knurled

  • Redmond, Washington, United States
  • Jun 11th
Machinist Made V Block

Machinist Made V Block

  • Paris, Ohio, United States
  • Jun 11th
Machinist Made V Block 2

Machinist Made V Block 2

  • Paris, Ohio, United States
  • Jun 11th

People who viewed this item also vieved

RITEN CARBIDE TIPPED DEAD CENTER MORSE TAPER #6 13" OAL SN090509 (LOC1228A) TS12

RITEN CARBIDE TIPPED DEAD CENTER MORSE TAPER #6 13" OAL SN090509 (LOC1228A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
CARBIDE TIPPED MORSE TAPER #4 DEAD CENTER 5.5" OAL (LOC1228A) TS12

CARBIDE TIPPED MORSE TAPER #4 DEAD CENTER 5.5" OAL (LOC1228A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
NEIDLEIN 28MM OD DEAD CENTER 24MM SHANK 2.5" OAL NL735 222 (LOC1227B) TS12

NEIDLEIN 28MM OD DEAD CENTER 24MM SHANK 2.5" OAL NL735 222 (LOC1227B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
HEAVY DUTY 3/4" HEX CHUCK JAW WRENCH

HEAVY DUTY 3/4" HEX CHUCK JAW WRENCH

  • Orland Park, Illinois, United States
  • Jan 30th
8" CNC Power 3 Jaw Lathe Chuck 1.5 x 60 Kitagawa style

8" CNC Power 3 Jaw Lathe Chuck 1.5 x 60 Kitagawa style

  • Columbus, Ohio, United States
  • Jan 30th
12" Ajax CNC Lathe Chuck Jaws Tools 3 Hard Single Step Jaws fit Kitagawa B12

12" Ajax CNC Lathe Chuck Jaws Tools 3 Hard Single Step Jaws fit Kitagawa B12

  • Columbus, Ohio, United States
  • Jan 30th
Ingersoll Rand Clamp P/N PG198OP

Ingersoll Rand Clamp P/N PG198OP

  • Chillicothe, Missouri, United States
  • Jan 30th
VERTICAL FLANGED BASE U-BAR TOGGLE CLAMP - 110 LBS HOLDING PRESSURE (3900-0330)

VERTICAL FLANGED BASE U-BAR TOGGLE CLAMP - 110 LBS HOLDING PRESSURE (3900-0330)

  • Chino, California, United States
  • Jan 30th
" DE STA CO" # 247U Hold Down Clamp

" DE STA CO" # 247U Hold Down Clamp

  • Coventry, Rhode Island, United States
  • Jan 30th
CNC Lathe Spindle Nose Collet Chuck

CNC Lathe Spindle Nose Collet Chuck

  • Johnson City, New York, United States
  • Jan 30th
USED NT TOOL HSK40A-HDC12-90 HIGH PRECISION COLLET CHUCK (Missing collet nut)

USED NT TOOL HSK40A-HDC12-90 HIGH PRECISION COLLET CHUCK (Missing collet nut)

  • Fairfield, Iowa, United States
  • Jan 30th
SHARS 1/2" Keyless drill chuck with R8 Integral Shank Arbor 13mm NEW

SHARS 1/2" Keyless drill chuck with R8 Integral Shank Arbor 13mm NEW

  • Saint Charles, Illinois, United States
  • Jan 30th
Erikson E656-7312 Type F .354 Collet

Erikson E656-7312 Type F .354 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
Erikson E656-7312 Type F .441 Collet

Erikson E656-7312 Type F .441 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
27/32" ACURA-GRIP #901250 Collet

27/32" ACURA-GRIP #901250 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
Cisco 1841 Router Faceplate for Replacement

Cisco 1841 Router Faceplate for Replacement

  • Hong kong, Hong Kong
  • Jan 30th
Cisco 2821 2851 Router Faceplate for Replacement

Cisco 2821 2851 Router Faceplate for Replacement

  • Hong kong, Hong Kong
  • Jan 30th
Cisco 2911 Router Faceplate for Replacement

Cisco 2911 Router Faceplate for Replacement

  • Hong kong, Hong Kong
  • Jan 30th
Dodge 1610x1-1/4" Taper Lock Bushing with 3/8" Keyway. Lot of 2

Dodge 1610x1-1/4" Taper Lock Bushing with 3/8" Keyway. Lot of 2

  • Bay City, Michigan, United States
  • Jan 30th
5 - Kipp Pull Knob M12 x 1.5 Indexing Plungers, Non-Locking, 03090-1206, QTY. 5

5 - Kipp Pull Knob M12 x 1.5 Indexing Plungers, Non-Locking, 03090-1206, QTY. 5

  • Maryland Heights, Missouri, United States
  • Jan 30th
Hilma-Rumheld Hydraulic Hollow piston Single Acting T-Slot Clamping Cylinder

Hilma-Rumheld Hydraulic Hollow piston Single Acting T-Slot Clamping Cylinder

  • Middlebury, Indiana, United States
  • Jan 30th
CNC Tailstock Chuck For 4th-Axis Rotary Axis A Axis Lathe Engraving Machine

CNC Tailstock Chuck For 4th-Axis Rotary Axis A Axis Lathe Engraving Machine

  • Guangzhou, China
  • Jan 30th
CNC 4th-Axis Rotary Axis Tailstock Chuck For Lathe Engraving Machine Accessory

CNC 4th-Axis Rotary Axis Tailstock Chuck For Lathe Engraving Machine Accessory

  • Guangzhou, China
  • Jan 30th
Adjustable tailstock for 6" rotary tables

Adjustable tailstock for 6" rotary tables

  • Duluth, Georgia, United States
  • Jan 30th
CHUCK SWIVEL VISE BASE

CHUCK SWIVEL VISE BASE

  • Bloomington, California, United States
  • Jan 30th
Bridgeport Machine Vise with Balcrank Handle

Bridgeport Machine Vise with Balcrank Handle

  • Berlin, Connecticut, United States
  • Jan 30th
WILTON ALL TERRAIN VISE

WILTON ALL TERRAIN VISE

  • Newington, Connecticut, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies