shaft brake for sale, brand-new and used.

KOMORI LITHRONE 40 INCH X-RITE DESCRIPTION: TRACK PART NUMBER: ATS40-109 CONDITION: SOLD AS IS PLEASE CALL 1-800-991-0400 EXT O FOR MORE DETAILS ALSO FOR SALE; FOLLOWING KOMORI PARTS IN STOCK

DIACRO/ROPER WHITNEY/ PUNCH AND DIES. THE SIZES ARE LISTED ON THE PAPER PICTURED PUNCH SHAFT 1/2" DIE 1.25" CALL ME WITH ANY QUESTIONS YOU MAY HAVE! 732-642-8271 VISIT MY STORE :BUFFERS - GRINDER - SANDERSDRILL PRESS

1XFY3 Gearmotor 115/105VAC 76 / 100 RPM, 1/20 Input HP, 86 Nameplate RPM TENV You are bidding on an

~~** SANYO R580BT-002E L2Z 2500 RPM 85 V 90 VDC 7.6 A SUPER R DC SERVO MOTOR WITH ENCODER NEW **~~ ~~** R580BT-002E L2Z 2500 RPM 85 V 90 VDC 7.6 A SUPER R DC SERVO MOTOR **~~ ~~** TYPE: R580BT-002E L2Z **~~~~ 500 W ~~~~ 85 V ~~~~ 7.6 A ~~~~ 2500 RPM ~~~~ T.G 7V/KRPM BRAKE DC 90 V ~~ ~~** ALL MEASUREMENTS ARE APPROXIMATE **~~

I am offering a DAYTON AC Gearmotor 115VAC Volts 1/4 HP 134 RPM. This item is listed as New Other because it comes from an opened box. This item may have been a previous return item, due to the numbers that have been written on the frame.

FORCE CONTROL POSIDYNE CLUTCH/BRAKE MODEL: 03-212-06 1 3/8" APPROXIMATE SHAFT DIAMETER FOR ADDITIONAL INFORMATION PLEASE SEE THE ABOVE PHOTOS. PLEASE NOTICE THAT ITEM HAS SOME SCUFFS, SCRATCHES, RUSTING ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF.

This is a used machine handle, has had the grip shaft welded into the eyelet end . Ships via FedEx ground or USPS. Free shipping to lower 48 USA only please read guidelines below before purchasing.

There are two air motors available in this auction. They are both brand new. Each purchase is for one unit.

SET OF 2 8" x 2" SCAFFOLD CASTER RUBBER MOLD ON WHEELS 1 3/8" TUBE SIZE & BRAKE These are in unused condition. Has a 1&3/8" diameter x 4" high shaft with a 7/16" hole for the pin. Found at a estate sale and I have no use for them.

SET OF 2 5" SCAFFOLD CASTER HARD WHEELS 1 1/4" SQUARE TUBE SIZE & BRAKE These are in unused condition. Has a 1&1/4" x 3&1/2" high square shaft with a 7/16" hole for the pin. Found at a estate sale and I have no use for them.

NEW SURPLUS ***DISTRESSED PACKAGING...MINOR SCUFFS, SCRATCHES, DUST AND SUCH FROM BEING WAREHOUSED*** DAYTON 4Z390 B AC GEAR MOTOR SPECS:

NEW SURPLUS ***DISTRESSED PACKAGING...MINOR SCUFFS, SCRATCHES, DUST AND SUCH FROM BEING WAREHOUSED*** DAYTON 1XFY2 AC GEAR MOTOR SPECS:

NEW Dayton 3M329A AC Gearmotor & 5X400 Magnetic Brake 30 RPM 1/15HP Co

KICK START COMPONENTS FOR A MODEL 92 MAYTAG ENGINE IN GOOD CONDITION CLUTCH BRAKE THINGIE IS GOOD AND STILL ADJUSTABLE FOR TIGHTNING

Unit is new unused, hard to find no longer available from grainger we purchased a few of these for a project, upon our testing the motor turned out to be more powerful than we needed, Technical Specs Phase1 Hz60 Shaft OrientationParallel 3/4" dia Nameplate RPM 90 Input HP 1/4 Gear Ratio 19:1 Full Load Amps4.6 EnclosureODP

Inventory #: MOT3698 Manufacturer: Kollmorgen Frame: 2 Enclosure: IP65 Voltage: 640 AC/DC: DC RPM: 8000 Model/Catalog #: AKM23D-BNC2DB01 Amps: 2.1 Description: Servo Motor Shaft Size (in.): 9 9 mm Shaft size, 1.11 Nm Torque, Nema Mount, 24 VDC Brake

Inventory #: MOT3703 Manufacturer: Baumuller Frame: 56 Enclosure: IP65 Voltage: 540 AC/DC: DC RPM: 2000 Model/Catalog #: DSG56-S Amps: 4.9 Description: Servo Motor Shaft Size (in.): 19 19 mm Shaft size, 3.8 Nm torque, Holding brake