shaft motor for sale, brand-new and used.

This auction is for a large Electro-Craft permanent magnet servo motor in excellent used condition that runs very smooth and quiet. The place on the tag for the model number is blank see picture #4. It also has a 5/8" X 1-1/2" shaft.

i used them for project in electronic and robotic very strong and very accurate motor perfect for hobbyist and devellopper. dc motor escap k24 with 6 inches cable swiss made Motor type: 22n 28 205e 32 Recommended operating voltage range: 12-24 V DC Speed: 295 RPMNo load current: 10 mA Gearhead ratio: 8:1Torque force: 1-1.5kg.CMGear: K24Power: 3.8WShaft dimensions: 6.2 mm Long x 2.5 mm Diameter 14 teethWeight: 2.7 oz. (77 g)Made in Switzerlanddimension are 57.50 mm long including shaft &nb

Synchron 115 VAC timer motor and drive shaft with coupling. Good working condition, originally off an analog gear driven timer. Ver

2005UD6G.68 New Sanyo Denki, Ball Bearing, 2 Phase 42MM Square (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

4000 RPM Buhler Permanent Magnet 24 V DC Hobby Motor with Large Grooved Pulley New motor manufactured by Buhler Nominal voltage: 24 V DC Voltage range: 4 - 24 VDC No load speed at 24 VDC: 4,000 RPM No load current: 330 mA Starting current: 14.5 A Can be operated in either direction: simply reverse polarity of power supply Shaft dimensions: 14 mm Long x 6 mm Diameter Comes with a shaft mounted pulley: 9 mm Long x 25 mm Diameter Aluminum pulley features 4 grooves Dimensions (not in

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

General Electric 1/20th HP motor, Model#5KSP29BG3054AT, Part #2322, 200-230 volts, 60-50HZ, 1050rpm, 3/8th inch shaft, Enclosure Open, Base Resilient ring with 4 tapped holes, Rotation CCW, Shaded pole-Single Shaft-Continuous Air Over. Designed for use on unit heaters,commercial condensing units,unit cooler fans and blowers and other air moving applications.These motors are new in the box but no longer in warranty by the manufacturer.

Brand new motor manufactured by Buehler Nominal voltage: 12 V DC No-load speed at 12 V DC: 2,000 RPM No-load current: 250 mA Stall current: 600 mA Runs in either direction - simply reverse polarity of power supply Shaft No. 1 dimensions: 6.3 mm long x 2.5 mm diameter Shaft No. 2 dimensions: 13.5 mm long x 2.5 mm diameter Motor dimensions (not including shaft): 56 mm L x 31 mm Dia.

A torque motor used for film reel take-up but can be used for other torque applications that require a steady pull. Overall length about 7.5" and diameter about 4.5" ACV: 220 FREQ: 60 PHASE: Single SHAFT: 3/8" on BOTH ENDS Has not been tested but worked when removed from theater.

SWF VALEO NIDEC ITT 404.621-G motor 12 V DC Typ: GML secoundhand

This is an auction for a NEW Mabuchi RS-550PF Motor with a 13,500 RPM CCW Rotation. The motor shaft has a Counter-Clockwise Rotation when looking directly at the front of the motor. This motor is New Old Stock (N.O.S.) from a bulk case, with no retail packaging.

?????

?????

?????

GE Commercial Motor Shaft Diameter: 0.312" Shaft Length: 1" Motor Length With Shaft: 7" Motor Diameter Without Mount: 4" 1/4HP 115V 60Hz 3.5 amps RPM 3450 Model # 5KC19NG352T Starter cap = 17.7 mF Continuous Operation Class B Phase 1 AMB 40C CW or CCW Thermally Protected Wires: Red, Blue, Yellow, Black, White New Old Stock, This motor has never had anything on the shaft.

175 RPM Large Gearhead Motor - 12V DC - High Torque - 6mm D Shaft New gearhead motor Operates on 4 – 12 VDC 175 RPM at 12V No load current at 12V: 80mA Stall current: 1,100 mA Speed is proportional with voltage (Speed range is 55 RPM @ 4V to 175 RPM @ 12V) Very high torque output, shaft is very difficult to stop by fingers even at just 6V D-Type Shaft dimensions: 27 mm Long x 6 mm Diameter Motor dimensions (not including shaft): 84 mm Long x 4

?????