shaft retaining ring for sale, brand-new and used.

Compatible Groove Depth 0.007 inchesCompatible Groove Diameter 0.222 inchesCompatible Groove Width 0.018 inchesFor Outside Diameter 5/64 inchesFor Shaft Diameter

External Retaining Ring, Steel, Inch, 1" Shaft Diameter, Pack of 100 Self-locking internal and external retaining rings provide shoulders in housings or on shafts of low-carbon steel, cast material and plastic. They are applied by pushing them into the housing (internal ring) or onto the shaft (external ring) to the desired position. When applying reverse force to the ring, the prongs embed themselves into the housing or shafts, holding them in place.

Standard External Retaining Ring, Tapered Section, Axial Assembly, 1060-1090 Carbon Steel, Zinc Yellow Chromate Plated Finish, 7/16" Shaft Diameter, 0.078" Thick, Made in US (Pack of 5) Specifications for this item Brand Name Small PartsPart Number SH-243ST ZDMaterial Type Carbon SteelSystem of Measurement InchBody Style StandardCompatible Groove Depth

100 pcs stainless steel external retaining snap rings. For 1/4" - 0.250" shaft. Ring measures 0.225" hole diameter, 0.025" thick.

ROTOCLIP SERIES SH AXIALLY ASSEMBLED EXTERNAL RETAINING RING SH-112ST PA LOT 1580152 QUANTITY 500 CARBON STEEL - PHOSPHATE COATING TYPE: EXTERNAL SHAFT OD: 1.1250 IN DESIGN: INVERTED LUGS

New, OEM, in the bag, retaining ring (push nut) for knife sharpener (#00-122794-4); truing wheel shaft.

External Retaining Ring, Stainless Steel, Inch, 3/4" Shaft Diameter, 0.042" Thick, Pack of 25 Useful in many machine assemblies, Retaining Rings provide an artificial shoulder for accurately locating, retaining or locking components in position, replacing nuts, threaded sleeves, cotter pins, rivets, machined shoulders and other bulkier fittings.The tapered design maintains circularity and pressure against grooves. They are axially applied and can be removed with Retaining Ring Pliers.

Standard External Retaining Ring, Tapered Section, Axial Assembly, PH15-7 Stainless Steel, Passivated Finish, 1/16" Shaft Diameter, 0.078" Thick, Made in US Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly.

For sale is a new, unused Char-Lyn hydraulic motor. This is a surplus military item that I never had the box for. It has a few scratches and scrapes on it as you can see in the photos.

Crescent External Retaining Ring, Tapered Section, Radial Assembly, SAE 1060-1090 Carbon Steel, Phosphate Finish, 5/16" Shaft Diameter, 0.025" Thick, Made in US (Pack of 50) Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly.

Hello and Welcome AB Dick 9810 Speed Control Shaft. This shaft is a replacement part for an AB Dick 9810 that uses a double pulley speed control. The shaft is machined with a cutout for the key, the retaining ring and flat spot for the set screws.

This was removed from a working A200 mixer. Includes shaft with 15 tooth gear, 2 jam nuts,32 tooth gear and key, spacer, 23 tooth gear and key and retaining ring

NRV 063 series worm gear speed reducer output shaft. This is a 1-1/8" diameter keyed single side output shaft kit for our 063 series reducer. Includes the shaft, keys, and retaining ring.

TRIPLEX PLUNGER PUMP FEATURES: MANIFOLD: Forged brass for strength and no porosity and long life. Higher hydrostatic pressure for safety and performance BOLTS: eight 10mm grade 8.8 PLUNGERS: Are a special aluminum oxide blend, solid ceramic for longer life, strong durability and more resilient. Ultra thick with SST retaining bolt.

TRIPLEX PLUNGER PUMP FEATURES: MANIFOLD: Forged brass for strength and no porosity and long life. Higher hydrostatic pressure for safety and performance BOLTS: eight 10mm grade 8.8 PLUNGERS: Are a special aluminum oxide blend, solid ceramic for longer life, strong durability and more resilient. Ultra thick with SST retaining bolt.