shaft rings for sale, brand-new and used.

Sterling Electric 2175FHQ01056101 10:1 Ratio

Fasco 5-5/8" Direct Drive Blower Motor - 277 Volts 1075 RPM Permanent Split Capacitor Sleeve Bearing Automatic Overload Open Enclosure 60 HZ 48 Frame Single Phase AMPS 3.9 - 2.2 - 1.6 BEARING TYPE Sleeve BRAND

Direct Drive Fan & Blower Motor Genteq 2825, GE 5KCP29KG5855S Direct drive furnace blowers, air conditioners, fans, blowers and locations where the motor is located in the airstream Plenty of ro

A.O. Smith Air Over open enclosure 1/2 HP electric motor new in the box Motor Code FR48Y, includes resil mounting rings, connection diagram on side of motor, 4 inch long shaft with 1/2 inch diameter. Never installed, just forgot to return and lost receipt.

K Series - Constant Fill Fluid Couplings These couplings are comprised of three main elements: 1. Driver impeller (pump) mounted directly to the coupling’s input shaft (power source side) 2. Driven impeller (turbine) mounted to the fluid coupling’s output (load side) 3.

EML7 EMS Marker Locator

IF YOU HAVE QUESTIONS CALL 1-800-748-1945 PAYPAL PREFERRED

Specifications Fitting Type: NPT Housing Material: PVC Meter Size: 1/2" (C05) Flow Range: 1.2 - 12 GPM (4.54 - 45.42 LPM) Accuracy (% of Reading): Turbine Only ± 2.0% Accuracy (% of Reading): Turbine w/ Computer ± 1.5% Repeatability: ± 0.3% Pressure Rating: 150 PSI / 10.2 BAR Operating Temp-no computer: -32°F to +140°F (0°C to +60°C) Operating Temp-with computer: +14°F to +140°F (-10°C to +60°C) Typical K-Factor: 2,400 Power: 9000 hour Lithium Batteries.

var itemNumber = window.ebayItemID ?

CAT Triplex Hi-Pressure pump 2. Model #: Cat 3535 - 100 to 1200 PSI @ 36.0 GPM 3. Baldor Motor Combination: 30 Hp, 230/460V, 3 ph, 60 Hz @ 76/38 Amps, 1760 RPM, 286T Frame, 1.15 Service Factor 4.

BRAND NEW RMW2.2G24-EZ PRESSURE WASHER PUMP For this model make sure your hoses connect to front of pressure washer. PURCHASED DIRECT FROM ANNOVI REVERBERI / AR NORTH AMERICA THERMAL RELIEF VALVE IS INCLUDED--$20.00 value 2400PSI, 2.2GPM Annovi Reverberi Direct Drive Pump

The MOSMATIC DYC 55.163 3/8FPT inlet and G3/8 M outlet Swivel is one of the most Popular and Dependable Rotary Unions on the market. This easy turning heavy duty DYCI swivel is specifically designed for use with water under high pressure at high rpm. Ready for installation as a self rotating unit with the appropriate spray bar and nozzles (not included) .

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Patented design pump head FEATURES: MANIFOLD: NEW high efficiency design concept. Patented forged brass for strength and no porposity for long life and higher hydrostatic pressures BOLTS: Eight 6mm grade 8.8 PLUNGERS: Ceramic coated stainless steel CRANKCASE: Precision die-cast cooling fins and anodized for maximum heat dissipation BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

L-8BB-111 -LL NOTICE TO BUYERS - if there are any delays in delivery - or any other problems - PLEASE - BEFORE opening a case, email or call us at 320-766-6888. We can usually remedy the situation immediately. ALSO if your shipping address is different than your registered PayPal address - be sure to contact us.

Standard Internal Retaining Ring, Tapered Section, PH15-7 Stainless Steel, Passivated Finish, 9/16" Bore Diameter, 0.035" Thick, Made in US (Pack of 10) Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly.

External Retaining Ring, Stainless Steel, Inch, 3/4" Shaft Diameter, 0.042" Thick, Pack of 25 Useful in many machine assemblies, Retaining Rings provide an artificial shoulder for accurately locating, retaining or locking components in position, replacing nuts, threaded sleeves, cotter pins, rivets, machined shoulders and other bulkier fittings.The tapered design maintains circularity and pressure against grooves. They are axially applied and can be removed with Retaining Ring Pliers.

Thanks for looking and Have a good day.