shaper spindle for sale, brand-new and used.

NEW ACCURA ASFA-003 SHAPER FENCE ASSEMBLY A wonderful fence system that will upgrade most shapers! Heavy Cast Iron! A $360.00 Value!

Powermatic 1" Spindle Assembly Shaper Brand new Heavy Duty Spindle Assembly with nut and 6 pcs spacers. 1" Diameter 5-1/2" Long

Powermatic 1" Spindle Assembly Shaper Brand new Heavy Duty Spindle Assembly with nut, washer and 6 pcs spacers. 1" Diameter 4-1/2" Long Allows you to use 4-1/8" tall cutters

INTERCHANGEABLE 1" Spindle Assembly Shaper NEW - OLD STOCK

Festo Double Spindle Shaper with Festo Power Feed. I have used this machine as a single spindle shaper, I do not have the second spindle. It is a 3/4" spindle machine.

We are currently renovating our woodworking shop into a concrete countertop shop. Therefore, we have quite a bit of equipment that we no longer need. All of the equipment in the shop has received very light use and is in excellent working condition.

Sottof Sales New and unused original Delta Part, in storage for years and still has some protective grease on it. Includes spindle, nut and 2 toothed washers. The box shown is not included as all three I have listed were in the one box.

Sottof Sales New and unused original Delta Part, in storage for years and still has some protective grease on it. Includes spindle, nut and toothed washer. The box shown is not included as all three I have listed were in the one box.

2 older type split shaper collars for ground tapered edge shaper profile cutters or knives - included are the pictured 2 complete collars sets and 6 knives plus a bar of 1-1/4 tapered edge shaper steel for making new shaper cutter profiles and a 3/4" shaper spindle ... these are used and so selling them as is buyer assumes all responsibility for their safe use - buyer agrees to pay all shipping cost [ west coast or etc ] study the pictures -

JET 708320 JWS-22CS 1/2-Inch and 3/4-Inch Interchangeable Spindle 1-1/2-Horsepower Shaper, 115/230-Volt 1-Phase Brand New in Open Box. Paint on a couple corners is chipped but unit is brand new in unused condition.

Very good condition used Master Machinery tilting spindle wood shaper. 5hp 3-phase, 1" spindle, switched reversible with independent push button magnetic start/stop switch. Made in Taiwan, 1986.

3/4" SHAPER SPINDLE FOR ROCKWELL / DELTA HEAVY DUTY Brand new

1-1/2 HP FROM ACCURA WOOD SHAPER-NEW TAKE OFF This motor came from a shaper that we sold to the Amish. They run their machines on a line shaft or with air or hydraulic motors. This allows us the opportunity to sell the motors for replacements to people who need to upgrade or replace a motor on smaller shapers.

Used Ekstrom 162 shaper, 8500 rpm, 5hp, 1630lbs. No detachable spindle, all you get is what the picture shows. Runs nice.

HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999 ________________________________________________________________________________________________________________________________________

Heavy Duty shaper 220v that is currently wired for 110v. All accessories included as pictured with less than 10 hours of use as router. Local pickup only in central NJ.

Sottof Sales New parts from years of storage in open bins, some staining but nothing that will impair use. Fits some 43-*** Series Delta Shapers, not sure exactly which ones. Please look carefully at the photos for dimensions to compare to yours to be sure this will fit your machine.

Sottof Sales New parts from years of storage in open bins, some staining but nothing that will impair use. Fits some 43-*** Series Delta Shapers, not sure exactly which ones. Please look carefully at the photos for dimensions to compare to yours to be sure this will fit your machine.

Sottof Sales New parts from years of storage in open bins, some staining but nothing that will impair use. Fits some 43-*** Series Delta Shapers, not sure exactly which ones. Please look carefully at the photos for dimensions to compare to yours to be sure this will fit your machine.

Product Description Product Description This high quality shaper cutterhead is the versatile, easy-to-use and cost effective solution to shaper work. Precision milled from the finest high-strength aluminum, these cutterheads feature dual pins to locate knives quickly and hold them securely. This cutter head includes a pair of straight knive