shell mill for sale, brand-new and used.

Here you have a shell mill holder with a 1.030'' spigot dia.The holder have a M20 x 2.00 male thread ( they came from a deckel ) Thanks for watching.

One R-8 Shell mill arbor for shell milling cutters with 1" ID. 2-1/4 Nominal OD. Right-Hand.

One R-8 Shell mill arbor for shell milling cutters with 1" ID. 2-3/4 Nominal OD. Left-Hand.

One R-8 Shell mill arbor for shell milling cutters with 1" ID. Includes one shell milling cutter, right-hand nominal 2-1/4" in diameter . I know very little about these types of cutters: They came to this home shop machinist about 10 years ago when I bought a batch of tooling at an auction.

Made by Techniks. This is a 3/4" Shell / Face Mill Arbor w/ CAT40 Shank. Model #: CAT40xFMA3/4"-6" SPECIFICATIONS: Arbor Diameter: 3/4" Arbor Shank: CAT40 Projection: 7" Overall Length: 11" Comes exactly as shown in pictures.

Kennametal KDNR400RN40C5 Shell Mill, in excellent condition, has seen little to no use. Does not come with inserts. 4" D1 maximum diameter shell mill.

Up for bid is a 3 Inch Ingersoll shell mill that has never been used. It fits a 1 1/4 arbor with 1/2 key slots. 2SJ1H-30040D4R10

Offered here is a 2" ETM Shell Mill Arbor which has a #40 NMTB mounting shank. Stamped into the arbor is the ID: 40 SM 2.000 x 2.500. Included with the shell mill holder are the (2) cutters shown in the picture.

New CAT50 V Flange Shell End Mill Holder, 1 1/4" Diameter x 3.5" Gage Length Part Number: 325120 New factory box. Nice Cat 50 shell end mill holder. In stock, ready to ship.

This is a nice R8 1" Shell Mill holder. In good condition and the keyed slot has no spins. Throw away the fly cutter and use a shell mill.

New CAT 50 V Flange Shell End Mill Holder, 1/2" Arbor x 1 1/2" Gage Length Part Number: Unknown New factory box. Nice Cat 50 shell end mill holder.

New CAT 50 V Flange Shell End Mill Holder, 1/2" Arbor Part Number: Unknown New factory box. Nice Cat 50 shell end mill holder. In stock, ready to ship.

This is for a Nice used Valenite shell mill cutter with a 5" cutting diameter mounted to a Davis cat50 shell mill toolholder

R8 Shell mill arbor/adapter/face mill holder. Ralmike's Tool-A-Rama brand. Has seen little or no actual use, just installation.

3 inch indexable shell mill. Thru coolant. One slightly damaged pocket.

I'm only calling this used because of the minor surface rust. It was purchased, put in a cabinet, shuffled around and never used. Details below.

Nikken BT40-S150-240 Shell End mill holder Good condition

The Moldex M2741R95 is a particulate respirator with a HandyStrap and Ventex valve. The 2741R95 is a patented Dura-M

The Moldex M2740R95 is a particulate respirator with a HandyStrap and Ventex valve. The 2740R95 is a patented Dura-M