silicon carbide seal for sale, brand-new and used.

Description Multistage Booster, Stainless Steel, HP 3, 3 Phase, Voltage 208-230/460, 10.7-9.8/4.9 Amps, Inlet/Outlet NPTF (In.) 1, 14 Stages, Max. Pressure (PSI) 190, Housing Material Stainless Steel, Impeller Material Noryl, Impeller Type Closed, Length (In.) 30-9/16, Width (In.) 6-1/2, Height (In.) 9, Max. Case Pressure (PSI) 300, Max.

Armstrong Pumps ARMflo E8.2b Bronze Circulator Pump 0-38 GPM Flow New In Box E.2 Series circulators are designed for use in a wide range of hydronic applications, including: Hot & chilled water recirculation Domestic hot water generation Snow-melt installations Radiant heating systems Geothermal heat pumps E.2 Series circulators have been re-designed to improve durability and provide enhanced protection against leakage and water damage to electrical components.

Out of the original box never used before. In great condition other than slight wear on outside. No manual but still have original installation screws.

Taco 2400 Series High Capacity Circulators are specifically designed for quiet, efficient, dependable operation in a wide range of medium to high flow/head hydronic heating, chilled water cooling and hot water recirculation applications.  The space saving, close-coupled, maintenance free motor with permanently lubricated, sealed-for-life bearings, stainless steel shaft, Noryl® impeller and durable, carbon/silicon-carbide mechanical seal provide unmatched reliability.

We are no longer a vender for Corken and we are now liquidating our Corken pump inventory. Please do not hesitate to send me an offer for one of our pumps. We have around 16 different pumps up for auction so, if this pump is not what you are looking for please feel free to message me on inventory inquires.

I am offering a Flint & Walling CJ103203 Booster Pump 2 HP 3-Phase 208-230/460V. The Item is listed as new other because the mounting bracket is bent due to freight ( see pictures ), the original box may be in good to fair condition. What you see in the picture is exactly what will arrive at your door.

$563.00 at Graingers plus shippingBUY FROM US AND SAVE $348.00 (61.8%) Submersible Sewage pumps are designed to remove sewage waste water from a residential home or commercial office. These pumps are designed to pass the typical suspended solids associated with sewage waste water. Sewage pumps typically operate intermittently and automatically with a float switch and can accommodate solids up to 2” in diameter.

4NS12N3EC - Goulds Pumps B4NS Non-Clog Sewage Pump 20 HP - 230 Volts - Three Phase Non-Clog Sewage Pump APPLICATIONS Heavy duty design features for a wide range of commer- cial and industrial applications such as: Sewage systems Flood and pollution control Industrial dewatering Wastewater treatment plants Municipal and subdivision lift stations FEATURES Impeller: Cast iron, two vane closed design for high ef-

Lightweight, portable, single phase submersible pumps are designed to handle water and solids. Built for the demands of construction, mining, municipality and farm applications. Oil lifter provides lubrication to seal faces during operation mimimizing the risk of seal failure due to overheating.

Description: Lightweight, portable, single phase submersible pumps are designed to handle water and solids. Built for the demands of construction, mining, municipality and farm applications. PST models feature shaft-mounted agitators which suspend solids when pumping sand and debris.

YOU ARE BIDDING ON Effluent Pump, Submersible WITH THE FOLLOWING SPECS : Operation TypeManual HP 1/2 Switch Type None Base Material Cast Iron HousingCast Iron Top Material Cast Iron Mechanical Seal SiC Impeller Material Polypropylene

UP FOR SALE SUMP PUMP , HERE ARE THE SPECS : HP 1/2

[ Dayton 1 HP 230 V 52 ft 3450 RPM Submersible Sewage Pump

[ Dayton 1/2 HP 120 V Automatic Submersible Effluent Pump

Warehouse Closing Down Sale! Retail Price: $950 Description Effluent Pump, Submersible, 1/2 HP, Housing Cast Iron, Impeller Material Polypropylene, 230 Voltage, 4.9 Amps, Height 17 5/16 In., Dia. 13 7/16 In., Cord Length 20 Ft., Discharge NPT 2 In., Max.

Warehouse Closing Down Sale!

Warehouse Closing Down Sale! Retail Price: $1,150 Description Effluent Pump, Submersible, Manual Operation (Switch Not Included), 1 HP, Base Material Cast Iron, Housing Cast Iron, Top Material Cast Iron, SiC/Buna, Impeller Material Polypropylene, 460* Voltage, 2.8 Amps, Height (In.) 16-3/4, Cord Length (Ft.) 20, Discharge NPT (In.) 2, Max. Dia.

Warehouse Closing Down Sale!

Warehouse Closing Down Sale!

Up for sale is a Brand New Goulds 1SC51C0AA Submersible Sewage Pump 1/2 HP 115 Volts 1/2 HP 115 Volts 3450 RPM 1 Phase 3 Stages 10.6 Max Amps Up for sale is the Goulds 1SC series Submersible Pump. All items included in this listing are brand new. Please refer to the included section in this listing.