sk wrench set for sale, brand-new and used.

-SELLING AS USED BUT THESE WRENCHES MAY BE UNUSED -THEY JUST HAVE SCRATCHES AND SOME DIRT / MARKINGS -THEY ALSO HAVE SOME SANDED MARKS WHERE MILITARY ETCHED NUMBERS WERE REMOVED (cosmetic) -2 PC SET INCLUDES THE FOLLOWING SK USA CHROME OPEN END WRENCHES: -MODEL 86426, SIZE: 13/16" X 7/8" -MODEL 86418, SIZE: 9/16" X 5/8"

You are bidding on a used cute little wrench, a Snap On Tools 1/4" & 9/32 Double Open End Wrench J1618A. Check out the photos carefully. That is what you are buying.

This is a huge lot (Aprroximateley 180 pieces) of Craftsman tools and includes metric and standard wrenches and sockets. 1/4" drive - fine toothe ratchet, breaker bar, driver handle, 14" 6" 3" extension, 3/16 - 1/2 6pt and 12pt shallow sockets, 5/16 to 1/2 deep 6pt, 4mm to 13mm 6pt shallow, 8mm to 14mm deep 6pt, 3/8 to 1/4 adapter.

Kippertools Tool Set - Used but Great Condition A great tool set for any mechanic or maintenance person! Typically Includes: Screwdrivers, Sockets, Extensions, Socket Adaptors, Crowsfeet, Ratchets Pliers, Flashlight, Filler Guage, SAE and Metric Wrench Sets, Hex Keys, Hammers, Rulers, Storage case, probing/retrieval tools, punches, and quite a few specialty tools not listed here. This kit typically contains brands such as Snap-on, Proto, Stanley, SK, Ecklind, and Nupla.

Kippertools Tool Set - NEW -Great Condition - Complete Tool Set A great tool set for any mechanic or maintenance person! Typically Includes: Screwdrivers, Sockets, Extensions, Socket Adaptors, Crowsfeet, Ratchets Pliers, Flashlight, Filler Guage, SAE and Metric Wrench Sets, Hex Keys, Hammers, Rulers, Storage case, probing/retrieval tools, punches, and quite a few specialty tools not listed here. Photos show what is included.

var itemNumber = window.ebayItemID ?

Super high torque 1 inch drive Makita electric impact gun TW1000 this tool is extremely powerful and very well made has very little use on it has lanyard ring on side and adjustable Second hand grip tested and working perfectly clean and ready to work comes with large impact socket set by WRIGHT tools also includes 1"drive to 3/4" drive adapter allowing you to u

Kippertools Tool Set - Used but Great Condition A great tool set for any mechanic or maintenance person! Typically Includes: Screwdrivers, Sockets, Extensions, Socket Adaptors, Crowsfeet, Ratchets Pliers, Flashlight, Filler Guage, SAE and Metric Wrench Sets, Hex Keys, Hammers, Rulers, Storage case, probing/retrieval tools, punches, and quite a few specialty tools not listed here. This kit typically contains brands such as Snap-on, Proto, Stanley, SK, Ecklind, and Nupla.

This sale is for ONE SET of THREE NOS SK Hand Tools made 9mm - 14mm WRENCHES. This set includes: 9mm x 11mm (#8809), 10mm x 12mm (#8810) & 13mm x 14mm (#8813). These wrenches have either a SuperKrome finish or satin finish for corrosion protection (see photos) and they will be as shipped.

SK Tools 5pc Torx Flat and Phillips Screwdriver Set SureGrip Round Keystone New SK Tools 5pc Torx Flat and Phillips Screwdriver Set SureGrip Round Keystone New This listing is for (1) SK 5-Piece Screwdriver Set as shown in the picture.

PRODUCT DESCRIPTION This product is designed specifically for cutting and stripping coaxial cables and this 3-blades model cable stripper is an essential tool for any inclusive coaxial toolkit. The three blades on this cable stripper are individually adjustable, allows you to make the minutest calculations and ensure the absolute accuracy of your cable trimming. This tool is further suited to the necessities of coaxial cable maintenance and is wide-ranging in its compatibilities.

Jacobs Chuck 0083579 SK 50 End Mill Tool Holder 25mm Diameter with 80mm Projection Technical Details Provides more accurate, rigid tool holder-to-spindle mount tapers Taper grounded to AT71 Easy change and set up. Low maintenance Through spindle coolant is standard

Jacobs Chuck 0083563 SK 30 End Mill Tool Holder 12mm Diameter with 50mm Projection Technical Details Provides more accurate, rigid tool holder-to-spindle mount tapers Taper grounded to AT61 Easy change and set up. Low maintenance Through spindle coolant is standard Product Description From the Manufacturer The Jaco

Jacobs 83569 SK 40 End Mill Tool Holder 16MM With 63MM Projection. Pre-Balanced To 18,000 RPM Technical Details Provides more accurate, rigid toolholder-to-spindle mount tapers. Taper grounded to AT3.

Jacobs Chuck 0083583 SK 50 End Mill Tool Holder 50mm Diameter with 125mm Projection Technical Details Provides more accurate, rigid tool holder-to-spindle mount tapers Taper grounded to AT75 Easy change and set up. Low maintenance Through spindle coolant is standard Product Description From the Manufacturer The Jacobs SK 50 end mill tool holder is designe

Jacobs Chuck 0083581 SK 50 End Mill Tool Holder 40mm Diameter with 100mm Projection Technical Details Provides more accurate, rigid tool holder-to-spindle mount tapers Taper grounded to AT73 Easy change and set up. Low maintenance Through spindle coolant is standard Product Description From the Manufacturer