slipped on the floor for sale, brand-new and used.

CHANDLER SWATCH-MASTER MODEL 12P 12 P PINKING BLADE CUTTER

SOLD MY COW HERD, ONLY USED COUPLE TIMES, BY FAR THE EASIEST & SAFEST WAY TO GET A MOTHER COW UP AND GOING..EXCELLENT USED CONDITION..ANY QUESTIONS PLEASE CONTACT ME.. For cows that cannot stand up on their own anymore, e.g. after giving birth.

var itemNumber = window.ebayItemID ?

If you have questions, please ask before bidding/purchasing. Please Note: Please be sure to check out our Condition Description. ITEM: Lot of (4) Safariland belt-mount mace or pepper spray black leather pouches with snap top security closures.

These are clothing forms made by the Royal Form Co. I don't know there age but they are all in great condition. There are 4 men and 1 woman form as of right now.

There is approximately 2.5 inches thickness of 0.15 inch thick hide coiled to form this leather headed mallet. It has done years of service. The total weight is 519gm., giving a quite substantial weight to the working head.

Here is an original clutch pulley that fits a 2-1/2hp to 12hp Hercules, Economy, or Jeager. It needs a little cleaning and such but it will make a nice pulley. The handle is loose, it spins and moves in and out but the pulley is stuck.

OPEN BOX STORE RETURN... Item has been UsedItem has been cleanedDoes seem to work Please see PhotosGift Rating (see below): CBistro Bur

Item # 1501014 Description: 12 volt linear actuator Manufacturer: Warner Model: D12-10A5-12CM3 Voltage: 12V DC Length of stroke: 12" Pin mounting hole size: 1/2" on motor end, 1/2" on rod end Length between pin mountings retracted: 21" Clutch: Yes Test results: Clutch slipped at 1600 lbs, tested at mid-stroke @ 13.5 volts, 65 degrees F. Notes: Additional Notes: I'm cleaning out the shop.

Item # 1501013 Description: 12 volt linear actuator Manufacturer: Warner Model: D12-10A5-12BR Voltage: 12V DC Length of stroke: 12" Pin mounting hole size: 1/2" on motor end, 1/2" on rod end Length between pin mountings retracted: 21" Clutch: Yes Test results: Clutch slipped at 1200 lbs, tested at mid-stroke @ 13.5 volts, 65 degrees F. Notes: Additional Notes: I'm cleaning out the shop.

Item # 1501012 Description: 12 volt linear actuator Manufacturer: Warner Model: D12-10A5-12CR Voltage: 12V DC Length of stroke: 12" Pin mounting hole size: 1/2" on motor end, 1/2" on rod end Length between pin mountings retracted: 21" Clutch: Yes Test results: Clutch slipped at 1500 lbs, tested at mid-stroke @ 13.5 volts, 65 degrees F. Notes: Additional Notes: I'm cleaning out the shop.

Item # 1501011 Description: 12 volt linear actuator Manufacturer: Warner Model: D12-10A5-12BR Voltage: 12V DC Length of stroke: 12" Pin mounting hole size: 1/2" on motor end, 1/2" on rod end Length between pin mountings retracted: 21" Clutch: Yes Test results: Clutch slipped at 1100 lbs, tested at mid-stroke @ 13.5 volts, 65 degrees F. Notes: Additional Notes: I'm cleaning out the shop.

Item # 1501009 Description: 12 volt linear actuator Manufacturer: Warner Model: D12-10A5-12BN Voltage: 12V DC Length of stroke: 12" Pin mounting hole size: 1/2" on motor end, 1/2" on rod end Length between pin mountings retracted: 21" Clutch: Yes Test results: Clutch slipped at 950 lbs, tested at mid-stroke @ 13.5 volts, 65 degrees F. Notes: Additional Notes: I'm cleaning out the shop.

Item # 1501007 Description: 12 volt linear actuator Manufacturer: Thomson Model: D12-21B5-12CF Voltage: 12V DC Length of stroke: 12" Pin mounting hole size: 1/2" on motor end, 1/2" on rod end Length between pin mountings retracted: 21" Clutch: Yes Test results: Clutch slipped at 2100 lbs, tested at mid-stroke @ 13.5 volts, 65 degrees F. Notes: Additional Notes: I'm cleaning out the shop.

Item # 1501006 Description: 12 volt linear actuator Manufacturer: Thomson Model: D12-21B5-10CW Voltage: 12V DC Length of stroke: 10" Pin mounting hole size: 1/2" on motor end mounted trunion bracket, 1/2" on rod end Length between pin mountings retracted: 13" Clutch: Yes Test results: Clutch slipped at 2200 lbs, tested at mid-stroke @ 13.5 volts, 65 degrees F.

Item # 1501003 Description: 12 volt linear actuator Manufacturer: Warner Model: D11-21B5-05BB Voltage: 12V DC Length of stroke: 5" Pin mounting hole size: 1/2" both ends Length between pin mountings retracted: 13" Clutch: Yes Test results: Clutch slipped at 1300 lbs. at mid stroke on extension @ 13.5 volts, 65 degrees F. Notes: Additional Notes: I'm cleaning out the shop.

Item # 1501001 Description: 12 volt linear actuator Manufacturer: Linak Model: 360024-00 Voltage: 12V DC Length of stroke: 11" Pin mounting hole size: 1/2" both ends Length between pin mountings retracted: 20" Clutch: Yes Test results: Clutch slipped at 2900 lbs. at mid stroke on extension @ 13.5 volts, 65 degrees F. Notes: Additional Notes: I'm cleaning out the shop.

Item # 1501002 Description: 12 volt linear actuator Manufacturer: Thomson Model: D12-10A5-12BFL Voltage: 12V DC Length of stroke: 12" Pin mounting hole size: 1/2" both ends Length between pin mountings retracted: 21" Clutch: Yes Test results: Clutch slipped at 1000 lbs. at mid stroke on extension @ 13.5 volts, 65 degrees F. Notes: this actuator has internal position switches wired to a 4 terminal Deutsche connector Additional Notes: I'm cleaning out the shop.