special bearing for sale, brand-new and used.

NEW 4" submersible Franklin motor for well pump Applications These motors are built for dependable operation in 4" diameter or larger water wells. Temperature and time rating continuous in 30°C (86°F) water at 7.6cm/sec (1/4 ft/sec) flow past motor. Rotation: single phase, CCW facing shaft end; three phase, electrically reversible.

You are bidding on ( 1 ) US Motors C55F-JW-3069, 1/2hp, 1425/1725 rpm, 220v, Electric Motor P/N C55F-JW-3069 HP - 1/2" Voltage - 220 Amps - 3.7 Hz - 50/60 Phase - 1 RPM - 1425 / 1725 Shaft - 1/2" x 2 1/2" Tanged - SEE PHOTO Bearing - Ball Special Service Duty Condition - NEW - but has some transportation marks and scratches Made in Mexico FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping.

This listing is for a brand new LEESON 1/2HP Pedestal Fan Yoke Mount motor #103722. This motor is still in the box with the original packaging. Due to the weight of this motor, the freight carrier needs your contact number.

PRICE REDUCED!!! I am letting these go CHEAP!!! FRIDAY SPECIAL!!!!!!!

I have three of these A.O Smith 1HP condenser motors. These motors are all still in their original packaging and have never been used. They come from a facility that was recently shut down.

24" Cutter Plotter & 15 x 15 Heat Press & Lots stuffs * Equipment can be purchased anywhere. There are often many choices for suppliers of any particular brand and model. There may also be many different prices for the same product.

ebay template // //form tags to omit in NS6+: var omitformtags=["input", "textarea", "select"] omitformtags=omitformtags.join("|") function disableselect(e){ if (omitformtags.indexOf(e.target.tagName.toLowerCase())==-1) return false } function reEnable(){ return true } if (typeof document.onselectstart!="undefined") document.onselectstart=new Function ("return false") else{ document.onmousedown=disableselect document.onmouseup=reEnable }

Phase meter D578 analog of Lutron, Advantest, Avtech, HP Agilent, NoiseCom, General Radio, Boonton, Anritsu, Fluke and general Electric, but has the same or better characteristics. This device can be used for wide measurement

Up for sale today, I have a like-new EXTECH THERMO-ANEMOMETER. Excellent condition. Per the manufacturer: "The EXTECH CF

Ametek 117123-00 Three stage, 240 volt, 5.7"/145mm diameter, Double ball bearings, Single speed, Tangential bypass discharge, Aluminum fan end bracket, Aluminum commutator bracket

var itemNumber = window.ebayItemID ?

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: eight 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precison die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

EZ SERIES 44S FEATURES: Solid ceramic plungers Flex coupling and bell housing available for direct drive Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version

EZ SERIES 44G FEATURES: Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version SPECIFICATIONS: Tripl

FEATURES: Innovative one piece plunger design 5% reduction in crankcase load compared to standard 3000 psi 15mm pumps Superior plunger performance against thermal shock and cavitation due to new, unique bonding process Standard SAE J609 gasoline mounting flange for up to 16hp engines Forged brass manifold with a 3:1 hydrostatic rating Die-cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: eight 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precison die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Valves, Seats, a

Patented design pump head FEATURES: MANIFOLD: NEW high efficiency design concept. Patented forged brass for strength and no porposity for long life and higher hydrostatic pressures BOLTS: Eight 6mm grade 8.8 PLUNGERS: Ceramic coated stainless steel CRANKCASE: Precision die-cast cooling fins and anodized for maximum heat dissipation BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Six 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precisions die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs. Bearings: Oversized for maximum life and load disbursement, two ball bearings.