THIS IS A BRAND NEW IN BOX BROWNING B 1 7/8" TAPER BUSHING FOR PULLEY/SHEAVES. COMES WITH 3 BOLTS AND 2 KEYS. BOX HAS BEEN OPENED, BUT EVERYTHING THERE AND UNUSED.
Browning Q1 Split Taper Bushing with 1&5/8" bore (shaft) and 2.875 bore for sheave (large end), and 4&1/8" flange diameter. Please see Browing catalog for details. Has 3 bolts and outer sheave key is still in keyway.
New Browning B 1-1/16" Split Taper Lock 1-1/16" Finished Bore Keyed These are new old stock and come with the bolts and the key stock needed. They do not have original box as they were displayed on shelving. ***** IF ITEMS ARE RECEIVED DAMAGED, TO RECEIVE A REPLACEMENT, YOU MUST PROVIDE IMAGES OF THE DAMAGE, AND ANY SHIPPER NOTES PER OUR INSURANCE REQUIREMENTS.
New Browning B 1-1/16" Split Taper Lock 1-1/16" Finished Bore Keyed These are new old stock and come with the bolts and the key stock needed. They do not have original box as they were displayed on shelving. LOT OF 8 ***** IF ITEMS ARE RECEIVED DAMAGED, TO RECEIVE A REPLACEMENT, YOU MUST PROVIDE IMAGES OF THE DAMAGE, AND ANY SHIPPER NOTES PER OUR INSURANCE REQUIREMENTS.
This is a Vintage Strong running 1/4 Horsepower General Electric motor from a Wood Lathe. Comes as pictured with an on/off switch mounting bracket and clips and Bolts as pictured. Has a 1/2" diameter shaft flat sided about 1 3/4" long 1/4 Horsepower 115 Volt 60 Hz 1725 RPM 5.6 amp single phase Reversible Currently wired clockwise (Right handed at shaft end).
The Drillco 400 series jobber length drill bit is made from high-speed steel with a black oxide finish and has a 135-degree split point with a heavy-duty web construction for drilling cotter pin holes and cross holes in heads of bolts made of stainless steel and other hard materials. The jobber length drill bit has a versatile midrange drilling depth. High-speed steel (HSS) provides hardness for wear resistance, and the black oxide finish reduces wear while promoting chip and coolant flow.
Hubbell foot kit for ladder rack. Includes 2 foot angles, 4 splice plates, 2 bolts, 2 hex nuts and 2 split lock washers. Use to secure vertical ladder to floor.
NEW/UNUSED ZHONGSHAN Broad-Ocean 875 RPM Air Conditioning Compressor Fan Motor 1/8 HP Model Y7S862B84 (622171) This motor is savaged from a new damaged-in-shipment Nordyne split system outdoor compressor unit Model JS4QE-030KB.The unit was damaged when carton turned over and caused the bolts holding the compressor in place to rip out of the plastic bottom of the unit. When compressor pulled out of place it broke the connector to th
Up for your consideration is a re-manufactured Ingersoll-Dresser 1.5X8, 150 GPM, 3667 RPM, 240ft head pump with a Reliance Electric 20hp, 460 volt 3ph motor. We believe the motor is new surplus and not a re-man but we're listing both as re-man because we don’t know for sure but pump itself is definitely a revised re-man and has rebuild/inspection numbers scribed in impeller and revision notice on the serial plate as can be seen in the photos.
3/4 Inch Split Lock Washers Zinc 100 pk We have 33 years experience in the fastener industry. We have a full line of fasteners including nuts, bolts, screws, washers, anchors, and much more. If you need an item or a different quantity please call us @ (901)476-4983 or send us a message.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.