spotting drill for sale, brand-new and used.

Keo #31346 1-3/4" 90 deg HSS Left Hand Spotting Drill Brand Keo

Cleveland C26173 6 Piece M42 Cobalt Heavy Duty Short Length NC Spotting Drill Bit Set, Gold Oxide Finish, Round Shank, Spiral Flute, 90 Degrees Point, 1/4"-1" Size (Pack of 1)

This is a Carbide Single End 2 flute spotting drill, countersink, chamfer tool. 1/8" Diameter 90° Degree PointSolid Carbide Spot Drill Dia: 1/8"Shank: 1/8" LOC: 1/4" (Length of Flute) LOA: 2-1/2" (length overall) FLT: 1 1/8" 90deg Spotting Drill

This is a new Carbide Single End 2 flute spotting drill, countersink, chamfer tool. 3/8" Diameter 90° Degree PointSolid Carbide Spot Drill Dia: 3/8"Shank: 3/8" LOC: 1" (Length of Flute) LOA: 2-1/2" (length overall) FLT: 2 3/8" 90deg Spotting Dril

SPOTTING DRILL BITS LOT OF 15 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 11X 5/16, 2X 7/32 AND 2X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 4 INCHES LONGEST AND 3 1/8 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 13 ARE MARKED TRW AND ACE AS MANUFACTURES UNKNOWN AGE

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 3X 5/8, 3X 5/16, 2X 7/32 AND 2X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 4 INCHES LONGEST AND 3 1/8 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 6 ARE MARKED TRW, ACE AND W&B AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 4X 5/8, 3X 5/16, 1X 7/32 AND 2X 1/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 3 5/8 INCHES LONGEST AND 3 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 8 ARE MARKED TRW, ACE AND W&B AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 4X 5/8, 3X 5/16, 1X 7/32 AND 2X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 4 INCHES LONGEST AND 3 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 6 ARE MARKED TRW, W&B AND ACE AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 3X 5/8, 4X 5/16, 1X 7/32 AND X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 3 7/8 INCHES LONGEST AND 2 7/8 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 5 ARE MARKED TRW AND ACE AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 1, 3X 5/8, 3X 5/16, 1X 7/32 AND 2X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 3 1/4 INCHES LONGEST AND 2 1/2 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 8 ARE MARKED TRW, ACE AND W&B AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 1, 1X 3/4, 1X 5/8, 4X 5/16, 2X 7/32 AND 1X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 4 INCHES LONGEST AND 2 3/4 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 7 ARE MARKED TRW, ACE AND SPI AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 1, 1X 3/4, 2X 5/8, 4X 5/16, 1X 7/32 AND 1X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 3 7/8 INCHES LONGEST AND 3 1/4 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 9 ARE MARKED TRW AND ACE AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 1, 1X 3/4, 1X 5/8, 2X 5/16, 2X 7/32, 1X 1/4 AND 2X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 3 3/4 INCHES LONGEST AND 2 1/8 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 7 ARE MARKED TRW, SRT AND ACE AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 3/4, 3X 5/8, 3X 5/16 AND 1X 1/4, 1X 7/32 AND 1X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 7 INCHES LONGEST AND 2 1/2 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 8 ARE MARKED TRW, ACE, AND CJT AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 1, 3X 5/8, 2X 5/16, 2X 7/32 AND 2X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 7 INCHES LONGEST AND 3 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 5 ARE MARKED TRW, ACE AND W&B AS MANUFACTURES UNK

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 1, 1X3/4 3X 5/8, 2X 5/16, 2X 1/4 AND 1X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 7 INCHES LONGEST AND 3 1/8 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 5 ARE MARKED TRW, SPI, ACE AND MOHAWK AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 1, 3X 5/8, 3X 5/16, 2X 7/32 AND 1X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 7 INCHES LONGEST AND 3 1/8 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 4 ARE MARKED TRW AND ACE AS MANUFACTURES UNKNOWN AGE

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 1, 5X 5/8, 2X 5/16, 1X 7/32 AND 1X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 7 INCHES LONGEST AND 3 1/8 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 5 ARE MARKED TRW AND ACE AS MANUFACTURES UNK

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X1, 1X 1/2, 3X 5/8, 2X 5/16, 1X 7/32 AND 2X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 7 INCHES LONGEST AND 3 1/4 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 4 ARE MARKED TRW, ACE AND MOHAWK AS MANUFACTURES

Two each Guhring high speed spotting drills. .500 diameter, 90 degree tip angle. Flutes are 1 3/16" long.