square nuts and bolts for sale, brand-new and used.

New medical office building has 2 stories and penthouse 164' x 120'. Average Square Feet per floor is 19,715 the Penthouse has 800 Square feet. The project was cancelled with 95% Plans after steel was ordered and purchased for $370,000.00 and before construction began.

NS5163 NUSHELTER Home-Model 5163 manufactured by CSC Building Systems This is a: 3 Bedroom

NS4136 is a 3 Bedroom, 2 Bath home with a large porch. Living area 1032 sqft, Porchs 383 sqft, Total 1415 sqft

This is a US Buildings Type A Modified Quonset Building kit. It was designed to be built in its entirety as one building or 2 or more shells. The total length is 60 feet, with a clear span of 25 feet and a height with straight sides of 12 feet 10 inches.

var itemNumber = window.ebayItemID ?

Used Interlake Drive-in racking system, single entry system to store Qty 192 - 45inch by 45inch pallets of 2000lbs each. ***WILL NOTE NOT system is 100% Complete - Missing a few uprights" Original design was for one section of 6 pallets deep x 4 pallets high with 3 arm levels, plus one on floor, 8 bays long (total of 192 pallet positions). Drive-In Pallet Rack Level Dimensions are: 1st level - floor

???If you do not see what you are looking for please ask??? You are bidding on one lot of pallet rack consisting of the following. One run 41.5' back to one run of 41.5' =10 bays/sections with 3 shelf levels per section.

Starrett Grind Vise Direct from the toolroom of a (now defunct) Fortune 500 company and never ever used or even unwrapped None better --none cheaper --check my prices against those of others --Why ??? I actually sell stuff Don't like my price ?? Consider MSC @ 1323.00 or $1227 @ Mytoolstore POOP Hardened steel Ground flat, square, and parallel within .000

This air gun is a 1/2 drive. Item is new just bounced around in tool chest. I tested item then placed in tool chest.

For sale is a complete LulzBot TAZ 4 Printed Parts and Hardware Kit. This kit comes with all the plastic printed parts (ABS), and all nuts and bolts as listed in the LulzBot TAZ 4 Bill Of Materials (BOM), to build and complete your own TAZ 4 3D Printer. PLEASE NOTE (READ PACKAGE LIST BELOW) This kit ONLY includes the plastic printed parts and hardware (nuts, bolts and everything else mentioned in the “Hardware” section of the TAZ BOM).

Have you ever had to hold a square to a press brake die to get a square bend line ??? What about create a bolt on angle attachment from shop supplies for parts with rounded edges ??? If so Brock Fab Tools has the solution for you ---This listing is for a Press Brake Magnetic Squaring Arm with Angle Gauge.

Press Brake Magnetic Squaring Arm. Dual guide instant simultaneous repeatability. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Telecom Surplus Resources

MATERIALS: Seat One-piece, 5/16" (8mm) thick, solidly fused plastic laminate with matte-finish melamine surfaces, ivor y-colored face sheets, and black phenolic-resin core that are integrally bonded ? cannot delaminate. Integral slots for water drainage.

Knife Making: Belt Sander/Grinder Tracking Wheel Assembly This listing answers certain requests by buyers who want to test their own skills in building the belt sander. This tracking/idle wheel assembly is ready made component and designed to fit over 1-3/4" tubing. You need to position this unit in the right place and tighten two bolts on its bottom.