All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item.
The Grundfos LM and LP are in-line, single-stage centrifugal pumps that feature a standard motor and mechanical shaft seals. These non-self priming pumps are fitted with identical suction and discharge ports, and are encased in spiral-shaped, cast iron pump housing. The LM and LP impellers are made of stainless steel with double curved blades and smooth surfaces to ensure a hydraulically correct shape.
MP Pumps FLOMAX 8 Cast Iron PUMPAK With Bearing Pedastal, 3/4" keyed shaft. — 6000 GPH, 40 PSI, 2 x 2 FLOMAX 8 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25' above the source. Once primed, the pump's built-in flapper valve will maintain a full column of liquid in the suction line.
AMT 3655-95 2" NPT Cast Iron Sprinkler/Booster Pump, Maximum Flow to 157 GPM, Maximum Pressure 150 PSI, Buna-N. AMT Sprinkler/Booster Pump Features 300 Series Investment cast stainless steel closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet.
This motor/pump was pulled out of a house that we switched to a VFD pump. Pump was operational, however noisy, we just upgraded thier water system. Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line) enabling installation in a horizontal one-pipe system.
MP Pumps FLOMAX 8 Cast Iron PUMPAK — 6000 GPH, 40 PSI, 2 x 2 FLOMAX 8 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25' above the source. Once primed, the pump's built-in flkapper valve will maintain a full column of liquid in the suction line. A FLOMAX PUMPAK is a fully assembled and run tested pump end that can be easily coupled to any 3 or 5.5 HP gasoline engine standard 3/4" keyed shaft engine.
The MK-2000 Gas Series of masonry saws have been designed for high-production cutting. The pull-down handle on the cutting head prevents operator fatigue and increases visibility during all cutting operations. Jig-welded, reinforced steel construction, combined with sturdy die cast aluminum uprights, provide positive alignment.
Stainless Steel TERCO High-Speed Centrifugal *Aerosol Pump* Sorter & Feeder Beautiful Machine Priced To Sell *Unit Is Set Up For Aerosol Spray Pumps/Actuators* **Centrifugal Disk Is Used To Sort Pumps, Then Feeds Them Through Track **WITH PUMP ESCAPEMENT** ***Adjustable Guides For Different Sized Aerosol Pump Sizes*** ***In Video Below A Hand
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.