straight knurling for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

16 pcs different 5/8" OD x 1/4" ID straight knurling rollers. 1/4" thick. Sizes/pitches in the lot : BS 41, GKS 247, BS 50, 35 TPI, 41 TPI, GKS 230, 47 TPI, BS 30.

For sale is a Jacobs 3A Drill Chuck plus a small group of machinist tools. Chucks comes with the key, and has a 1.5" Jacobs Straight Shank Arbor A4503. There is a 6" Union Tool Square (missing paint on the handle), a few starrett punches, one has a chip on the edge of the tip, some other misc parts.

The finished tool could be used on lathe, mill, drill or vise. the KIT consists in: cut material, detailed drawings (assembly and parts) and all the components to be able to build the tool in the last picture is shown the final product (for reference only) knurling wheels size: 3/4 dia, 3/8 thk., 1/4 dia.

The finished tool could be used on lathe, mill, drill or vise. In the last pictures is shown the final product and some details. the KIT consists in: cut material, detailed drawings (assy, and parts) and all the components to be able to build the tool in the last (5) pictures is shown the final product (for reference only) the size of the wheels is: 1/2 dia, 3/16 thk., 3/16 dia.

Accu-Trak 33 TPI Knurling Tool Knurls

Accu-Trak 14 TPI Knurling Tool Knurls

CONDITION; USED, GOOD CONDITION. TOP QUALITY, HARDINGE LATHE KNURLING TOOL. SHANK IS; 3/8" x 1/2" 1/2" DIA KNURLS, HAS FINE STRAIGHT KNURL WHEELS INSTALLED.

Lathes: Technical Manual TM 1-420, originally published by the U.S. War Department, Washington, DC, September 1940. Reproduced by Nation Builder Books, Mebane, NC, 2010.

For Knurling Diamond Or Straight Patterns, Also Used To Hold Small Facing Tools And Center Drills

Anti-Blowback valve Uniweld EZ Turn Adapter-Straight Part# EZAB 1/4" Male Flare x 1/4 Female Flare This valve eliminates refrigerant loss and blowback of cold refrigerant. • New seal valve technology enables use on systems with limited access to service ports. • Add to existing hose to eliminate refrigerant loss and comply with EPA regulations • Deep easy grip knurling and non-restrictive porting for maximum refrigerant flow

Anti-Blowback valve Uniweld EZ Turn Adapter-Straight Part# EZABM 1/4" Male Flare x 5/16 Female Flare (R410A Size) This valve eliminates refrigerant loss and blowback of cold refrigerant. • New seal valve technology enables use on systems with limited access to service ports. • Add to existing hose to eliminate refrigerant loss and comply with EPA regulations • Deep easy grip knurling and non-restrictive porting for maximum refrigerant flow

Klein Tools No.1604-20 Cable Puller    Designed for use when light, compact grip is desired and where conductor damage is not a factor.     Has a swing latch to help hold cable in the jaw.     Approx.

Uniweld EZABM R-410-A EZ-Turn Anti-Blowback Adaptor 1/4" m x 5/16" F - NEW! Uniweld EZABM EZ Turn Anti-Blowback Adaptor is a straight adaptor with a 1/4 ” male fitting on one end and a 5/16” female fitting on the other end to connect to any hose and service R410A Mini Splits. The EZ Turn Anti-Blowback Fitting has a thrust bearing that reduces friction so the service hose can be easily connected to the access fitting while under pressure.