FOR SALE IS A BRAND NEW ROCKWELL COLLINS - MILITARY SURPLUS - DC MICRO-AMPERES METER. THIS DC METER HAS A RESISTANCE OF 1000 OHMS AND THE PART NUMBER IS 458-0573-00; THE NSN IS 6625008429719. THE SPECIFICATIONS ARE AS FOLLOWS:
This Greenlee Slug Spliiter draw stud measures approximately 0.625" in diameter and is about 5.5" inches long. Model #502 9452.0. Threaded at both ends; for use with hyrdaulic drivers.
This Greenlee Slug Spliiter draw stud measures approximately 0.625" in diameter and is about 5.5" inches long. Model #502 9452.0. Threaded at both ends; for use with hyrdaulic drivers.
GREENLEE 60118 STUD-DRAW 3/4-16X6.94 For maximum draw stud life, greenlee recommends the use of battery or hydraulic drivers Application : For Special Shape Punches Length : 6-3/4 IN (171.500 MM)
GREENLEE 60166 STUD-DRAW 1/2-20X4.75 For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers Application : For Special Shape Punches Length : 4-5/8 IN (117.500 MM)
GREENLEE 60117 1/2-20X4.75 DRAW STUD For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers Application : For Special Shape Punches Length : 4-5/8 IN (117.500 MM)
Brand New direct from the manufacture LOT OF 500 PIECESBULK PACKEDFANCY CREME SUEDE STUD EARRINGS PUFF PAD / EARRINGS CARDSIZE IS 1 1/2 x 1 3/4 GOLD FOIL PRINTED "14 k GOLD "Made of very fancy soft plush american suedeSturdy vinyl back / with inner foam for a fan
GREENLEE 3" KNOCK OUT PUNCH Round standard metal punch units are complete units consisting of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes
Punch, Radio Chassis, 5/8” (.625”), Greenlee 730 Greenlee #730-5/8 Round standard metal punch units are complete units consisting of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes SPECIFICATIONS Capacity: 16 ga. (1.500 mm) (Mild Steel) For Use With: Greenlee Ball Bearing Draw Studs, Greenlee Ratchet or Hydrauli
This is a new old stock stud mount rectifier diode by Powerex Part # 220402P2 500 Volts 100 Amps No nut included Shipping Information: I will combine mu
Knife center plate stud (Globe # 386) for Globe slicers 75, 150, 285, 300, 400, 500, 510, 610, 660, 685, 710, 715, 720, 725, 725L, 760, 765, 770, 775, 775L, 815, 820 and 825 Please note, customs and duty taxes are the responsibility of the consignee and are not included in the shipping cost.
You are buying a used Greenlee 5004188 500-4188 Conduit Knockout Punch Draw Stud. This draw stud will come as pictured in good working condition. Shipping will be free to the lower 48 states.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.