take up bearing for sale, brand-new and used.

Click Image To View Full Size

Guzik V2002 XY-positioning spinstand with Air-Bearing Spindle Promotional pic Crashproof XY-Positioning to protect spindle Piezo actuator with ±0.012 µInch (±0.3 nm) positioning accuracy Supports Embedded Servo Revision 2 and 3 Positioning repeatability* of 0.05–0.11 µInch (1.3–2.8 nm) Peak-to-Peak deviation of track profile slope Non-Repeatable Runout* (NRRO) in Servo mode 0.04-0.07 µInch (1.0-1.8 nm),

Product Description The Checkline LMI-S Digital Consumption Meter Magnetic Sensor Type is a precision instrument that accurately measures the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder.

Untitled Document SINGER 132K12 Industrial Sewing Machine For trimming stitching and trimming soft shoulder pads (arm scye work). Flat bed, drop feed, needle bar link, link take-up, high lift vertical trimmer, trimming knife on hinged holder controlled by spring pressure. Rotating hook mechanism with replaceable bearing rings a

http://www.duerkopp-adler.com/export/sites/duerkoppadler/commons/download/public/467-180/b467_gb.pdf Please let us know if you have any questions. 256-229-6595 ext. 3306 We have a ADLER 467- FA-373 # 98833 Ser.

Here is a good Schmidt shaper molder blade set up.The colar measures 1 1/4 inches across the center,1 inch thick and 3 inches overall.The side with the bearings is 1 1/8 overall.The blades are 1 inch wide and 1/4 inch thick.(I have a few more this thickness if you are interested).The condition of the blad

Note: This is a per-order, the bits will not be dispatched till the 23/12/2014. This is due to an overwhelming demand for this product for Christmas. However because of t

Blade Straight Router Bit Twin Bearing 1/4" x 1/4" Long SKU 00300-285

KREG HD JIG KREG MODEL: HD NEW IN BOX! Description Bigger bit, bigger screws, and of course—bigger projects. The Kreg Jig® HD delivers the strength and confidence you need to

Industrial model, Ball Screws on all axis and over 100 inches per min travel. This is a 24"x 24" x 4.5" CNC. It's milled from 6061 aluminum, 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis.