thread pipe nipple for sale, brand-new and used.

This Is a Small Ball Muffler For the Hit & Miss Gas Engines Using A 3/4" Pipe Thread For the Exhaust. This is very similar to the Ball Mufflers that were used on the various Early Hit & Miss Gas Engines Like Sparta Economy, Waterloo, Galloway, Associated, New Way, Gade, Stover, IHC, Etc.. Except Smaller & Works good With Briggs & Stratton, Lauson, Novo, Nelson Bros., IHC LA & LB, Stover, Etc..

This Is a Small Ball Muffler For the Hit & Miss Gas Engines Using A 1" Pipe Thread For the Exhaust. This is very similar to the Ball Mufflers that were used on the various Early Hit & Miss Gas Engines Like Sparta Economy, Waterloo, Galloway, Associated, New Way, Gade, Stover, IHC, Etc.. Except Smaller & Works good With Briggs & Stratton, Lauson, Novo, Nelson Bros., IHC LA & LB, Stover, Etc..

This Is a Reproduction Ball Muffler, Originally Used On the Early Stover 1 Hp & 1 1/2 Hp K Hit & Miss Gas Engines Using A 3/4" Pipe Thread For the Exhaust. This is Made from An Original Muffler I Had Patterned Up And Castings Made from...... They Have A 3 1/2" Piece of 3/4" Black pipe Cast Right Into It Just As The Originals were, The Muffler Castings Are Part Numbers K 210 & K211 That show Up nicely !!

Untitled Document Swagelok Cajon® 1/16" NPT Male x 1/16" NPT Male Hex Nipple 316 Stainless Steel Instrumentation Grade Swagelok Part. No. SS-1-HN Warning: A 1/16 inch NPT Male pipe fitting, abreviations known as MNPT NPTM MIP MPT MP has an outside diameter of over 1/4 inch.

See All Photos with ruler 1/4" pipe thread measures much larger than 1/4"

This Is an Exact Replica Cone Style Muffler For the 2 1/2 - 3 Hp Hp Hercules, Economy, Jaeger, & Arco Hit & Miss Or Throttle Governed Gas Engines Using A 1 1/4" Pipe Thread For the Exhaust !! This is about 8 3/4" In Dia ..... 6 1/4" tall With the pipe 1 1/4 " Pipe thread......

See photos with ruler 3/8" pipe thread measures much larger than 3/8"

This is for a 316 Stainless Steel 2" NPT x 5" Long Pipe Nipple MADE OF SHC 40 PIPE. ***Please note*** I only have 3 of these made from one piece of pipe and none of these that are left are 316 S.S. but like I said it's all from the same pipe.

This is a New Replacement Ball Muffler For the Waterloo & Waterloo Contract Hit & Miss Gas Engines ...... Part # AG50 Fits: 2 1/2 3 4 & 5 Hp Sizes 1 1/4" Pipe Correct For: AMERICAN BOY, BANNER, BAUER, BIG CHIEF, DESJARDENS,

This is a New Replacement Ball Muffler For Any Engine That Uses A 1 1/4" Pipe thread For the exhaust, It is Like Many Of The Mufflers That Were Made back Then & was used On Many Brands & Models Of Hit & Miss Gas Engines. This Is Bolted Together Like the Originals Were With 5/16" Square Nuts & Bolts, They were used On The Galloway, Associated, United, Witte, Amanco, 6 Hp John Deere, & Many Others, Basically anything with 1 1/4" Pipe thread Or Whatever You Can Adapt it to !!!!

This is a New Replacement Ball Muffler For Any Engine That Uses A 1 1/4" Pipe thread For the exhaust It is Like Many Of The Mufflers That Was Made back Then, But They Are Very Similar The Early Waterloo & Waterloo Contract Hit & Miss Gas Engines I would Say Before About 1910 Or 1911 ......

ebay

This auction is for mixed surplus lot of brand new SAFEWAY quick disconnect couplers. Get an amazing deal of these parts valued at over $30,000.00. I am happy to answer any questions you may have.

20-1 1/4 F5OF-S Parker Male-female thread adaptor – UNF 1.5/8-12 1.1/4-11.1/2 Pipe & Port Nipple