PRODUCT DETAILS CVACZ-G699 This Digital Laser Distance Measurer can be used for 0.2 to 40 meter ranges, with a 1/4 Inch Tripod Thread and built in spirit level it delivers accurate measurements for distance, area and volumetric measurements, which can be displayed in imperial or metric units.
PRODUCT DETAILS CVACZ-G702 This Laser Distance Measurer can be used for 0.2 to 100 meter ranges, it has a 1/4 Inch Tripod Thread and a built in spirit level as well as being able to deliver distance, area and volumetric measurements in imperial or metric. Digital Laser Measurements When you want spot on measurements quickly then this is the tool for you. At about 100 grams in weight, its light and compact and the easy carry case makes save room in your pocket and keeps it easily accessible.
New Oster 3D Bolt Die Set 3/4 x 10 NC - Left hand thread. From an old time plumbing tool supply company that closed. Dies are new, Packaging is old and shop worn from sitting in an unheated warehouse for many years and may have some corrosion on them.
New Oster 300 Bolt Die Set 3/6 x 16 NC - Left hand thread. From an old time plumbing tool supply company that closed. Dies are new, Packaging is old and shop worn from sitting in an unheated warehouse for many years and may have some corrosion on them.
New Oster 3D Bolt Die Set 7/8 x 9 NC - Left hand thread. From an old time plumbing tool supply company that closed. Dies are new, Packaging is old and shop worn from sitting in an unheated warehouse for many years and may have some corrosion on them.
New Oster 3D Bolt Die Set 1 x 8 NC - Left hand thread. From an old time plumbing tool supply company that closed. Dies are new, Packaging is old and shop worn from sitting in an unheated warehouse for many years and may have some corrosion on them.
Here we have QTY.1 of a Very sharp RIGHT HAND Tap, I do not see any chipped teeth. This is NPSM National pipe straight thread and is not the same as NPT taper thread pipe. Length 4-3/4" US made by Regal Beloit HSG TE-10547 also says Ductile iron on it Shank size is .906" Diameter round with a .676" square drive High speed steel hs hss
Here we have QTY.1 of a Very sharp RIGHT HAND Tap, I do not see any chipped teeth. This is NPS National pipe straight thread and is not the same as NPT taper thread pipe. Length 4-1/2" US made by Union Shank size is 29/32" Diameter round, it does not have a square end like most taps High speed steel hs hss
NEW 3/4'' ULTRASONIC THERMAL ENERGY/HEAT METER FLOW SENSOR METER for Heating or Cooling System flow measurement Ultrasonic heat meters for the mechanical and electrical integration of intelligent heat metering devices, on cold, precise measurement of
Ricoma 1501TC 1 head 15 needle commerical embroidery machine with computer touch screen. Used for trade shows and showroom demos approx 1 year old. Includes full set of hoops for Flats and caps.
This offer is for a NEW Enerpac RC-102, "MADE IN USA" 10 Ton Single Acting Cylinder. Single Acting Cylinder, General Purpose, Steel, Capacity 10 Tons, Stroke 2.13 In., Oil Capacity 4.75 Cu.-In., Retracted Height 4.78 In., Outside Dia. 2.25 In., Plunger Dia.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
