threaded shaft for sale, brand-new and used.

For sale is a threaded adjustable I-beam anchor/clamp. This was used in my garage to attach an i-beam to my truss for an i-beam trolley. Approximate measurements: 28" long, shaft 15/16" diameter, clamp opening 1 1/8" wide x 2 15/16" long.

Replacement Survey Tripod Threaded Bolt and Swing Arm NAME BRAND TRIPODS ONLY - We do not know if this will fit in a Chinese knock-off Don't use a bolt from the hardware store, they can be over-tightened or be threaded in too far causing damage to your costly instrument. Fits CST Berger, Bosch and David White tripods, if your unit resembles the ones seen in the boxes with a small hole than they will fit, smooth bore shaft is 3/4 of an inch in length. Threaded b

Replacement Survey Tripod Threaded Bolt ONLY NAME BRAND TRIPODS ONLY - We do not know if this will fit in a Chinese knock-off Don't use a bolt from the hardware store, they can be over-tightened or be threaded in too far causing damage to your costly instrument. Fits CST Berger, Bosch, David White, SitePro, SECO and Sokkia tripods, if your unit resembles the ones seen in the boxes with a small hole than they will fit, smooth bore shaft is 3/4 of an inch in length. Threaded b

No idea what it is , but I'm sure it's quite $$ to buy at dealer . It's heavy , guessing about 12 lbs. + or - .

Genuine U.S. Military Issue Surplus   General Electric - Valve Lift Rod  for Turbine    GE P/N: 101C414BC 1 GE PN: 125D257AD G1   NSN: 2825-00-887-4714   The overall length is 10 1/2" The overall size of the  shaft is 8 3/4" x 9/16" Diameter The threaded end is 1 1/8" x 1/2" Threaded Diameter The end is 1/2" x 3" Diameter There are four holes in the end, they are 3/8" Inner Diameter There is a notch on the end, it is 3/8" x 3/8" Made of Steel Weight: 1 1/2 LBS. Unused!

This is a brand new ATI model AT333B 1/4-28 threaded reverse pancake drill. It has a 1/4" drive shaft and is about 4" long. The tool is absolutely perfect.

Hello, welcome to my eBay auction venue. ALL OHIO RESIDENTS WILL BE REQUIRED TO PAY the maximum Ohio Sales Tax Rate of 8% for APPLICABLE OHIO POINT of DESTINATION SALES TAX WITHIN THE COUNTY WHERE THE ITEM WILL BE SHIPPED ROUNDED UP TO THE NEXT CENT.

CP 315 SUNAN Core Drill / Cutter The CP315 Sunan-B

"Mini Mirco Stop Countersink Cage - Threaded Spindle 1/4 x 28 - NEW designed with a 1/4 x 28 threaded spindle which can be operated in angle drills. The "Mini" Micro Stop Countersink Cage is adjustable in increments of 0.001" for precision countersinking. High Quality.

1/3 HP Westinghouse A/C Motor Double Shaft 316P 641 316P641 Motor was tested to work great (ran it for 30 min plus). Shafts measure: Smaller non threaded: 1 7/8" long, 3/8 " diameter. Keyway.

About us Shipping

This sale is for 1 new and complete Synthes Basic Bone Screw Set. All hardware is in the manufacturer's packaging. Inventory is as follows: 4 214.014 4.5 mm Cortex Screw 14 mm4 214.016 4.5 mm Cortex Screw 16 mm8 214.020 4.5 mm Cortex Screw 20 mm8

About us Shipping

Dugan Hardware Systems D.H.S. Heavy Duty Leveler Legs w/ Lock Nuts - 600 Lb. Capacity per Leg - Adjusts from 0" to 2-1/2" - 4 Pcs.

This is a unused 1/4-28 threaded pancake drill with 1/4" shaft. It is thin and measures just 3/8" thick. The tool is 3-1/4" long.