threaded shank for sale, brand-new and used.

Set of 5 Brand New Dual Wheel Casters 1/4 Inch Diameter Bolt Type Insert---3/4" Shank I have a couple of boxes of these - approximately 400 of these to sell. This auction is for a set of 5. As you can see they have a threaded shank.

Home | All Listings | About Us |

Precision Twist TS10 High Speed Steel Threaded Shank (Short Series) Drill Bit, Black Oxide Finish, Threaded Shank, Spiral Flute, 135 Degree Point Angle, 7/32"

SMALL TOOLS INC. Questions? Call us at (800) 821-2674 or message us over eBay.

This is a set of 90 mounted grinding stones. The stones measure just under 3/4'' wide and the length is just under a 1''. The threaded shank is roughly a 1/2''.

This is a set of 73 mounted grinding stones. The stones measure just over 1/4'' wide and 3/4'' long. The threaded shank is roughly a 1/2''.

This is a set of 27 mounted grinding stones. They measure just under 1'' across. The threaded shank is roughly a 1/2''.

Made by Erickson. This is a Threaded Arbor Tool Holder w/ NMTB40 Shank. SPECIFICATIONS: Arbor: 5/8" - 18 tpi Shank: NMTB40 Projection: 1-1/4" Overall Length: 5" Comes exactly as shown in pictures.

SHARS 2MT SHANK TO 5/8"-16 THREADED DRILL CHUCK ARBOR 2 MORSE TAPER MT2 NEW Prime Quality Product Code 202-5732

This is a set of 82 mounted grinding stones. The stones measure just over 1/2'' wide and 7/8'' long. The threaded shank is roughly 1/2''long and 1/8'' wide.

Tapmatic 1/2" Straight Shank Arbor with Threaded Mount, 3/8"-24 Thread Product Features

This is a set of 28 mounted grinding stones. The top of the stone measures 5/8'' wide. The threaded shank is roughly a 1/2''.

Genuine U.S. Military Issue Surplus   Steel Machine Bolt - P/N: C7564 P/N: C7564 We are not sure who manufactured this part, we came up with the following.... Cooper Cameron Corp.

AAJD Thread Class 3A AAJF