tig rod for sale, brand-new and used.

Ck WF-3 Cold Wire Feeder Welder Welding Tig Torch Welding Nice machine that was removed from a high end Aerospace machine shop that closed down. Appears to be complete with a tig torch and all cable hookups. Was in good working order when the shop closed down.

All are used less than a handful of times. You will see all items look and perform new. Ck worldwide WF-3 coldwire feeder Huntingdon Fusion Techniques Limited - PurgEye 100 Weld Purge Monitor Tig Pen - is an item for beginners learning how to feed the wire.

The Syncrowave 180SD is a complete single-phase, TIG/Stick squarewave power source package. All you need is filler gas, some Stick electrodes and you're ready to start welding. With over 30 years in squarewave technology, the Syncrowave 180 SD packs a maximum of 180 amps with 150 amps @ 30% duty cycle.

Up for sale today is a NICE Lincoln DC-600 STICK/MIG CC/CV Multi Process with an LN-7 wire feeder. We have run this machine through our shop and it is fully tested LOAD AND WELD FUNCTION TESTED. The machine comes with an LN-7 wire feeder, 15' Profax MIG gun, Amphenol cable (machine top mount), 15' Ground cable with clamp, And your choice of drive roll size with guide tubes.

Auction is for a very nice Lincoln Precision TIG 185 in very good condition with just a few small scuffs and very low hours. Comes complete with gas tank and regulator, foot pedal, factory power cord and plug, torch and leads. Also comes with several types of filler rod, spare collets and other spares.

ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding.

[ Purchased from estate sell.]Miller Big 40-G gas welder, Continental 3-cylinder gas engine,Liquid cooled, Model-TM 20, Serial number-99061235. Estimated year built 2003-2004 Comes with Miller Hwy-224 trailer .Welder is bolted to trailer bed with slide adjustments. Ground lead-22' 1/0, Stinger lead=28' 1/0 Run hours=2,800 No remote control.

Never been used. Will include 3ft. tank of Argon, 2 lbs.

Miller TIG Welder with everything you need to Start Welding Today. •Miller TIG Welder Maxstar 200 ST •Big Argon Bottle w/ dual Regulator, Purge hose, Custom Permanent Wrench for Removal of Regulator (see photo)

ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding.