tool holders for sale, brand-new and used.

Jacobs Chuck 0067311 CAT V 40 Tension/Compression Tap Holder System 3 with Tap Size M14 to M36 and 73mm Projection Technical Details Quick change style; allows taps to be changed quickly Rigidity; reliable and easy to use for general tapping applications Torque structure limits prevent breakage Tension/Compression Tap holders available Product Description Fr

Jacobs Chuck 0065160 ISO 529/ 2283 Clutch Type Tapping Collet- System 1, Tap Size M10 with 8.0mm Tap Shank and 6.3mm Drive Square Technical Details Quick change style; allows taps to be changed quickly Rigidity; reliable and easy to use for general tapping applications Torque structure limits prevent breakage Tension/Compression Tap holders available Overload clutch Product Description

Jacobs Chuck 0065132 DIN 371 Clutch Type Tapping Collet System 2, Tap Size M8 with 8.0mm Tap Shank and 6.2mm Drive Square Technical Details Quick change style; allows taps to be changed quickly Rigidity; reliable and easy to use for general tapping applications Torque structure limits prevent breakage Tension/Compression Tap holders available Overload clutch Product Description

Jacobs Chuck 0085330 HSK 63 A Shell/ Face Mill Tool Holder 40mm Diameter with 60mm Projection Technical Details Balanced to 8,000 RPM Provides more accurate, rigid tool holder-to-spindle mount tapers Taper grounded to AT3 or better Easy change/setup and low maintenance Through spindle coolant Product Description From the Manufacturer

Jacobs Chuck 0065450 DIN 371 Rigid Tapping Collet System 1, Tap Size M7 with 5.5mm Tap Shank and 4.3mm Drive Square Technical Details Quick change style; allows taps to be changed quickly Rigidity; reliable and easy to use for general tapping applications Torque structure limits prevent breakage Tension/Compression Tap holders available Overload clutch Product Description

Jacobs Chuck 0066220 BT 50 Rigid Tap Holder System 1 with Tap Size M3 to M14 and 179.8mm Projection Technical Details Quick change style; allows taps to be changed quickly Rigidity; reliable and easy to use for general tapping applications Torque structure limits prevent breakage Tension/Compression Tap holders available

Jacobs Chuck 0085220 CAT V 50 Shell/ Face Mill Tool Holder 1-1/4-Inch Diameter with 5-Inch Projection Technical Details Balanced to 8,000 RPM Provides more accurate, rigid tool holder-to-spindle mount tapers Taper grounded to AT3 or better Easy change/setup and low maintenance Through spindle coolant Product Description From the Manufacturer The Jacobs CAT V 50 Shell/Face mill tool holder is designed to hold up to a 1-1/4-Inch shank cutting tool. It has a 5-Inch projection an

For sale is a set of BT30 tool holders. Included is the following. 5 - Toolmex ER32 collet holders ( 4 have retention knobs for a Haas DT-1 ) 4 - Toolmex ER20 collet holders ( All have retention knobs for a Haas DT-1 ) 2 - Precision Components Endmill holder 1/8" ( Both have retention knobs for Haas DT-1 ) 1 - Precision Components Endmill holder 3/8" ( It has a retention knob for Haas DT-1 ) Sold the machine without the tooling so selling these off cheap.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

This is a set of three #40 tool holders. One has an i.d. of 1.25" the other two are 1".

var itemNumber = window.ebayItemID ?

Made by Techniks & Carboloy. These are 2 Endmill Tool Holders in good condition. Specifications: Capacities: 1/4" & 3/4" Shanks: CAT40 Projections: 2-3/8" & 2-7/8" Overall Lengths: 6-1/2" & 7" Comes exactly as shown in pictures.

Made by GS. These are 2 Endmill Tool Holders in good condition. Specifications: Capacities: 1/4" & 1" Shanks: CAT40 Projections: 2-3/8" & 3-7/8" Overall Lengths: 6-5/8" & 8" Comes exactly as shown in pictures.

Made by Techniks. These are 2 Endmill Tool Holders in good condition. Specifications: Capacities: 1/4" & 3/8" Shanks: CAT40 Projections: 2-3/8" & 2-7/8" Overall Lengths: 6-1/2" & 7" Comes exactly as shown in pictures.

Made by GS & Techniks. These are 2 Endmill Tool Holders in good condition. Specifications: Capacities: 3/4" & 1" Shanks: CAT40 Projections: 2-7/8" & 3-7/8" Overall Lengths: 6-3/4" & 7" Comes exactly as shown in pictures.

Made by Richmill & Techniks. These are 2 Endmill Tool Holders in good condition. Specifications: Capacities: 3/16" & 3/8" Shanks: CAT40 Projections: 2-1/4" & 2-3/8" Overall Lengths: 6-3/8" & 6-1/2" Comes exactly as shown in pictures.

Made by Richmill. These are 2 Endmill Tool Holders in good condition. Specifications: Capacities: 1/4" & 3/8" Shanks: CAT40 Projections: 2-1/4" & 2-3/8" Overall Lengths: 6-3/8" Comes exactly as shown in pictures.