transformer isolation pads for sale, brand-new and used.

The Antek 600VA isolation power toroidal transformers are commonly used for high end equipment such as audio amp and sensitive instrument. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. In addition, there are 2 accessory coils (high current) to add on either input or output coil to boost up output or increase input voltage.

The Antek 1500VA isolation power toroidal transformers are commonly used for high end equipment such as audio amp and sensitive instrument. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. In addition, there are 2 accessory coils (high current) to add on either input or output coil to boost up output or increase input voltage.

The 600VA toroidal transformers are commonly used in the noise sensitive equipment, high-end audio products, isolation transformer, stepper motor supply, or servo motor supply. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires then the normal requirement to avoid the copper lost during the full power output.

Product Description This Antek 100VA tube amp power transformer has 4 output coils 230V x2 and 2 of the 6.3V 3A coil. It is made for medium power amp or preamp. The independent outputs can connect in parallel for more current or series for double voltage (center tap).

The 200VA toroidal audio power transformers have static shield between primary and secondary coils to improve the isolation and noise interference. In addition, there is a silicon steel bend for magnetic shield to reduce low frequency humming. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz.

The 600VA toroidal transformers are commonly used in the noise sensitive equipment, high-end audio products, isolation transformer, stepper motor supply, or servo motor supply. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires then the normal requirement to avoid the copper lost during the full power output.

The 600VA toroidal transformers are commonly used in the noise sensitive equipment, high-end audio products, isolation transformer, stepper motor supply, or servo motor supply. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires then the normal requirement to avoid the copper lost during the full power output.

Product Description This Antek 100VA tube amp power transformer has 4 output coils 150V x2 and 2 of the 6.3V 3A coil. It is made for medium power amp or preamp. The independent outputs can connect in parallel for more current or series for double voltage (center tap).

Product Description This Antekinc 50VA tube amp power transformer has 3 output coils 160V with 140V tap and 2 of the 6.3V 2A coil. It is made for small power amp or preamp. It comes with Antek CA-050 transformer cover.

Product Description This Antekinc 50VA tube amp power transformer has 3 output coils 120V with 100V tap and 2 of the 6.3V 2A coil. It is made for small power amp or preamp. The 50VA toroidal audio power transformers have static shield between primary and secondary coils to improve the isolation and noise interference.

Product Description This Antek 50VA tube amp power transformer has 3 output coils 280V with 260V tap and 2 of the 6.3V 2A coil. It is made for small power amp or preamp. The 50VA toroidal audio power transformers have static shield between primary and secondary coils to improve the isolation and noise interference.

Product Description This Antek 50VA tube amp power transformer has 3 output coils 320V with 300V tap and 2 of the 6.3V 2A coils. It is made for small power amp or preamp. The 50VA toroidal audio power transformers have static shield between primary and secondary coils to improve the isolation and noise interference.

Product Description This Antek 100VA tube amp power transformer has 4 output coils 350V x2 and 2 of the 6.3V 3A coil. It is made for medium power amp or preamp. The independent outputs can connect in parallel for more current or series for double voltage (center tap).

The 50VA toroidal audio power transformers have static shield between primary and secondary coils to improve the isolation and noise interference. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires than the normal requirement to avoid the copper lost during the full power output.

The 50VA toroidal audio power transformers have static shield between primary and secondary coils to improve the isolation and noise interference. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires than the normal requirement to avoid the copper lost during the full power output.

The 50VA toroidal audio power transformers have static shield between primary and secondary coils to improve the isolation and noise interference. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires than the normal requirement to avoid the copper lost during the full power output.

The 50VA toroidal audio power transformers have static shield between primary and secondary coils to improve the isolation and noise interference. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires than the normal requirement to avoid the copper lost during the full power output.

The 50VA toroidal audio power transformers have static shield between primary and secondary coils to improve the isolation and noise interference. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires than the normal requirement to avoid the copper lost during the full power output.

The 100VA toroidal audio power transformers have static shield between primary and secondary coils to improve the isolation and noise interference. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires than the normal requirement to avoid the copper lost during the full power output.

The 100VA toroidal audio power transformers have static shield between primary and secondary coils to improve the isolation and noise interference. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires than the normal requirement to avoid the copper lost during the full power output.