Included Items Item Description Shipping Info Payment Info * Trimble SPS850 Extreme 430-450 MHz Base Or Rover Receiver [ID- X1467] w/ Options... - CMR Inputs - CMR Outputs - RTCM Inputs - RTCM Outputs - Data Collector - Moving Base - Bluetooth - L2CS - UHF Transmit - L5 - LBand - Enable GLONASS - Enable Webserver - 430-450 MHz Internal Radio - Serviced By A Trimble Authorized Service Center * Trimble Multi-Port Power Adapter P/N: 57168 * AC Adapter/Charger * Power Cord * RS232 PC Interface Cable * User Manual On CD-ROM * Carrying Case (G) Condition: Refurbished Warranty: 90 Day Exchange Trimble SPS850 Extreme 430-450 MHz Base Or Rover Receiver w/ Options... - CMR Inputs - CMR Outputs - RTCM Inputs - RTCM Outputs - Data Collector - Moving Base - Bluetooth - L2CS - UHF Transmit - L5 - LBand - Enable GLONASS - Enable Webserver - 430-450 MHz Internal Radio - Serviced By A Trimble Authorized Service Center Trimble SPS850 Extreme Receiver Flexible modular receiver for permanent base station, mobile base station and rover operations for GPS modernization. The Trimble® SPS850 Modular GPS Receiver sets new standards for fast setup and flexible operation in both base station and rover applications. The Trimble SPS850 Receiver supports Global Positioning System (GPS) modernization through support of L2C code, L5 GPS carrier signal, and GLONASS protecting your investment well into the future. The new signals will improve performance in tough satellite coverage environments (deep cuttings, mines, trenches, landfill sites and around tall buildings) and at longer ranges from the base station. Modularity provides the ability to choose the appropriate GPS antenna for the application, Zephyr Geodetic Model 2 at the base station and the Zephyr Model 2 for the mobile units. The GPS and radio antennas can be mounted high in permanent and semi-permanent base station applications so that they are clear from obstructions and provide maximum radio coverage, while the receiver is locked in a secure environment safe from theft and environmental conditions. The choice of radio antennas allows the customer to either attach it to the receiver itself for mobile base station and rover applications, or use a high gain or directional antenna for maximum range on large job sites. Standard System Features: Integrated GPS receiver and radio Internal 450 or 900 MHz radio with Transmit/Receive capability 72-channel L1/L2/L2C/L5/GLONASS GPS receiver OmniSTAR XP and HP service capable WAAS, EGNOS & MSAS Satellite Based Augmentation (SBAS) compatible Tough housing IP67 environmental rating -40 °C to +65 °C (-40 °F to +149 °F) operating temperature range 9V to 30V DC input power range with over-voltage protection Long life integrated battery. >10 hrs operation as a base station and >12 hrs as a rover with internal Transmit/Receive radio. (New battery operating at room temperature.) Integrated display and keypad for system configuration without a controller Integrated Bluetooth® for cable free configuration with a controller or Bluetooth enabled radio External GPS antenna choice for base station or rover operation Rubber duck antenna, or attach a high gain radio antenna for maximum coverage Small, lightweight design – 1.65 kg (3.64 lbs) (receiver with internal radio and battery) 4 kg (8.82 lbs) complete system weight (Rover including controller and rod) Permanent or semi-permanent base station, or mobile base station versatility ATV, belt, rod, supervisor’s vehicle or marine vessel mounting options for rover applications Capable of all site measurement and stakeout operations within radio or cellular coverage Capable of rover operation within a VRS (Virtual Reference Station) network Easy-to-use menu system for fast configuration and status checking Autobase for rapid and automated repeated daily base station setups Supports IP so that it can be configured and checked remotely over the Internet via an Ethernet port One base station receiver can broadcast corrections via multiple radio links. For example, broadcast corrections via an internal 450 MHz radio, as well as an external 900 MHz radio from the same base station receiver SPS850 Base Station Features: Provides unrestricted operational range for rovers and grade control systems Base station and rover operation in a single receiver Integrated Transmit/Receive radio Integrated Ethernet and IP capability facilitates base station and receiver configuration over the Internet or via Ethernet connection on a computer network Web-based User Interface allows for remote configuration or troubleshooting Specifications: General Characteristics Keyboard and display VFD display 16 characters by 2 rows On / Off key for one button startup with Autobase Escape and Enter key for menu navigation 4 arrow keys (up, down, left, right) for option scrolls and data entry Receiver type Modular GPS receiver Antenna type Base Station Rover OmniSTAR Rover Zephyr Geodetic Model 2 Zephyr Model 2 Z+ Antenna Also supports legacy antennas Zephyr, Zephyr Geodetic, Micro-Centered Choke ring, Rugged micro-centered for GPS L1/L2 operation only Physical characteristics Dimensions (L x W x D) 24cm (9.4 in) x 12cm (4.7 in) x 5cm (1.9 in) including connectors Weight 1.65 kg (3.64 lb) receiver with internal battery and radio 1.55 kg (3.42 lbs) receiver with internal battery and no radio Temperature Operating Storage -40 °C to +65 °C (-40 °F to +149 °F) -40 °C to +80 °C (-40 °F to +176 °F) Humidity 100%, condensing Waterproof IP67 for submersion to depth of 1 m (3.28 ft), dustproof Shock and vibration Shock - non operating Shock – operating Vibration Tested and meets the following environmental standards: Designed to survive a 2m (6.6 ft) pole drop onto concrete MIL-STD-810F, Fig.514.5C-17 To 40 G, 10 msec, saw-tooth MIL-STD-810F, FIG.514.5C Performance characteristics Measurements Advanced Trimble Maxwell 5 Custom GPS chip Trimble R-Track ™ technology for tracking the new L2C Civil Signal GLONASS, L5 Signal for GPS modernization High-precision multiple correlator for L1, L2 and L5 pseudo-range measurements Unfiltered, unsmoothed pseudo-range measurements data for low noise, low multi-path error, low time domain correlation and high dynamic response Very low noise L1, L2 and L5 carrier phase measurements with <1mm precision in a 1 Hz bandwidth L1, L2 and L5 Signal-to-Noise ratios reported in dB-Hz Proven Trimble low elevation tracking technology 72 Channels L1 C/A Code, L2C, L5C, L1/L2/L5 GLONASS Full Cycle Carrier WAAS / EGNOS / MSAS Code differential GPS positioning Horizontal accuracy Vertical accuracy WAAS / EGNOS / MSAS2 Horizontal accuracy Vertical accuracy ±(0.25m + 1 ppm) RMS, ± (9.84 in + 1 ppm) RMS ±(0.50m + 1 ppm) RMS, ± (19.68 in + 1 ppm) RMS Typically <1 m (3.28 ft) Typically <5 m (16.40 ft) OmniSTAR Positioning XP Service Accuracy HP Service Accuracy Horizontal 20 cm (7.87 in), Vertical 30 cm (11.80 in) Horizontal 10 cm (3.93 in), Vertical 15 cm (5.90 in) Real Time Kinematic (RTK) positioning Horizontal Vertical Initialization time Regular RTK operation with base station RTK operation with Scalable GPS infrastructure Initialization reliability ±(10 mm + 1 ppm) RMS, ± (0.38 in +1 ppm) RMS ±(20 mm + 1 ppm) RMS, ± (0.78 in +1 ppm) RMS Single/Multi-base minimum 10 sec + 0.5 times baseline length in km, <30 km <30 seconds typical anywhere within coverage area Typically >99.9% Electrical characteristics Power Internal External Integrated internal battery 7.4V, 7800 mAh, Li-Ion Internal battery operates as a UPS in the event of power source outage Internal battery will charge from external power source when input voltage is >15V Integrated charging circuitry Power input on Lemo 7 pin 0 shell Lemo is optimized for lead acid batteries with a cut off threshold of 10.5V Power input on the 26 pin DSub connector is optimized for Trimble Li-Ion battery input (PN 49400) with a cut off threshold of 9V Power source (Internal / External) is hot swap capable in the event of power source removal or cut off 9V to 30V DC external power input with over-voltage protection Receiver will automatically power on when connected to external power of 15V or greater Power consumption 6.3w, in RTK rover mode with internal receive radio 8.5w, in RTK Base mode with internal transmit radio Rover operation times on internal battery 450 MHz 2.0W systems 900 MHz 1.0W systems 12 hrs; varies with temperature 12 hrs; varies with temperature Base station operation times on internal battery External radio 450 MHz 0.5W systems* 900 MHz 1.0W systems 16 hrs; varies with temperature 10 hrs; varies with temperature 12 hrs; varies with temperature Certification Class B Part 15, 22, 24 FCC certification Canadian FCC CE mark approval C-tick approval UN ST/SG/AC.10.11/Rev. 3, Amend. 1 (Li-Ion Battery) UN ST/SG/AC. 10/27/Add. 2 (Li-Ion Battery) UN T1 – T8 (Li-Ion Battery) 49 CFR Sections 100-185 (Li-Ion Battery) WEEE Communications Port 1 (7-pin 0S Lemo) Port 2 (DSub 26-pin) Bluetooth 3-wire RS-232 CAN Full RS-232 (Via multi-port adapter) 3-wire RS-232 CAN USB (On the Go) (Via multi-port adapter) Ethernet (Via multi-port adapter) Fully integrated, fully sealed 2.4 GHz Bluetooth Integrated radios Channel spacing (450MHz) Frequency approvals (900MHz) 450MHz Transmitter radio power output 900MHz Transmitter radio power output Fully integrated, fully sealed internal 450 MHz, TX, RX or TXRX Fully integrated, fully sealed internal 900 MHz, TX, RX or TXRX 12.5 or 25KHz spacing available Dealer Changeable with TX, TX/RX End user settable with RX only USA (-10), Australia (-20), New Zealand (-30) 0.5w / 2.0w 1.0w (30 dBm) External GSM / GPRS, cell phone support Supported for direct dial and internet based VRS correction streams Cell phone or GSM/GPRS modem inside TSC2 controller Receiver position update rate 2 Hz, 5 Hz, 10 Hz and 20Hz positioning Data Input and Output CMR, CMR+, RTCM V2.0, RTCM 2.1, RTCM 2.3, RTCM 3.0 Outputs NMEA, GSOF and RT17 Carrier Supports BINEX and smoothed carrier We will attempt to ship your item(s) within 24 hours after payment has been received. Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you Put your auctions on autopilot with Kyozou eBay Auction Tools
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
