Turning Lathes (Woodworking Equipment & Machines) for sale, page 14

(2) vintage logan lathe metal face plates 6" diameter

La Grange, Illinois, United States
Nov 27th

2 Vintage Logan Metal Face Plates 6" diameter. Very good condition. Please ask questions.

Jacobs drill chuck no. 0 f46 0-5/32" sears craftsman 6" metal lathe #109-20630

Birmingham, Michigan, United States
Nov 26th

This auction is for the Steel Keyless Jacobs Drill Chuck as pictured from a Vintage 6" Sears Craftsman Metal Lathe Model #109-20630 with a 1 1/4" Gap between Bed rails and 2 1/2" point to point of Inverted V shaped bed rails. It is marked Jacobs No. 0 0-5/32" Capacity F46.

Weiss wbl250f bench top 10” x 30” lathe - belt drive all leadscrews are imperial

Vacaville, California, United States
Nov 24th

AuctivaEasson3Mill799Ver1

Wood lathe faceplates,buffer, grinder arbor 1 inch 8 tpi (4 pieces)

Southold, New York, United States
Nov 24th

Here is a four piece set that should fit any lathe with one inch, eight threads per inch. Included is a six inch faceplate, a three inch faceplate, a two and one half inch faceplate and a buffer grinder arbor. All in very good condition as shown in the pictures.

Weiss wbl280f bench top 11” x 28” lathe - belt drive all leadscrews are imperial

Vacaville, California, United States
Nov 23rd

AuctivaEasson3Mill799Ver1

7 1/4" long 1/2" spindle 20 tpi from sears craftsman 6" metal lathe #109-20630

Birmingham, Michigan, United States
Nov 22nd

This auction is for the Headstock Spindle Assembly as pictured from a Vintage 6" Sears Craftsman Metal Lathe Model #109-20630 with a 1 1/4" Gap between Bed rails and 2 1/2" point to point of Inverted V shaped bed rails. Has a 1/2" diameter spindle with 20 threads per inch on the inside and unthreaded with a flat side outside. Wear and Tear Dust and Dirt rust and pitting but in Good working condition.

Goodell-pratt co vintage keyless drill chuck & arbor 6" metal lathe #109-20630

Birmingham, Michigan, United States
Nov 22nd

This auction is for the Old Goodell-Pratt Keyless Drill Chuck & arbor as pictured from a Vintage 6" Sears Craftsman Metal Lathe Model #109-20630 with a 1 1/4" Gap between Bed rails and 2 1/2" point to point of Inverted V shaped bed rails. The Unusual chuck is small..@ 4" Long overall marked Goodell-Pratt Company Greenfield Mass USA pat Aug 13, 1895 The capacity is not marked--@ 1/4".The arbor is unusual--I can't exactly measure the threads close to 24 but not exact..3/8: diameter.

4 step motor pulley 1/2" bore set scr. sears craftsman 6" metal lathe #109-20630

Birmingham, Michigan, United States
Nov 21st

This auction is for the Small Unmarked Heavy Alloy or Pot Metal motor pulley as pictured from a Vintage 6" Sears Craftsman Metal Lathe Model #109-20630 with a 1 1/4" Gap between Bed rails and 2 1/2" point to point of Inverted V shaped bed rails. Has a 1/2" diameter bore not threaded set screw mount About 1 3/4" thick ..takes belts about 5/16"-3/8" wide.

Assorted gears & parts & handle from sears craftsman 6" metal lathe #109-20630

Birmingham, Michigan, United States
Nov 21st

This auction is for the group of parts as pictured from a Vintage 6" Sears Craftsman Metal Lathe Model #109-20630 with a 1 1/4" Gap between Bed rails and 2 1/2" point to point of Inverted V shaped bed rails. The 2 largest are 3253 64 teeth..2nd is3245 4832-16 double...3221 32...3233 243231 20 Wear and Tear Dust and Dirt rust and pitting slight nicks on teeth but in decent working condition. Local Pick-up Available in Troy Michigan about 10 miles North of Detroit.

Set of 8 alloy gears nice shape! from sears craftsman 6" metal lathe #109-20630

Birmingham, Michigan, United States
Nov 21st

This auction is for the Nice set of pot metal or alloy gears as pictured from a Vintage 6" Sears Craftsman Metal Lathe Model #109-20630 with a 1 1/4" Gap between Bed rails and 2 1/2" point to point of Inverted V shaped bed rails. Smallest to largest:3235 323237 363239 403241 443243 463243 463247 523249 543251 56 Wear and Tear Dust and Dirt rust and pitting slight nicks on teeth but in good working condition. Local Pick-up Available in Troy Michigan about 10 miles North of Detroit.

Jack shaft with pillow blocks from sears craftsman 6" metal lathe #109-20630

Birmingham, Michigan, United States
Nov 21st

This auction is for the Jack Shaft with 2 pulleys and 2 pillow blocks as pictured. as pictured from a Vintage 6" Sears Craftsman Metal Lathe Model #109-20630 with a 1 1/4" Gap between Bed rails and 2 1/2" point to point of Inverted V shaped bed rails.

3 3/4" steel face plate 5/8" bore from sears craftsman 6" metal lathe #109-20630

Birmingham, Michigan, United States
Nov 21st

This auction is for the Heavy Steel Face Plate Pictured. from a Vintage 6" Sears Craftsman Metal Lathe Model #109-20630 with a 1 1/4" Gap between Bed rails and 2 1/2" point to point of Inverted V shaped bed rails. Has a 5/8" diameter bore mounts on an unthreaded shaft with a set screw.

4" alloy face plate 1/2"-20tpi from sears craftsman 6" metal lathe #109-20630

Birmingham, Michigan, United States
Nov 21st

This auction is for the Unusual Alloy or Pot Metal Face Plate Pictured. from a Vintage 6" Sears Craftsman Metal Lathe Model #109-20630 with a 1 1/4" Gap between Bed rails and 2 1/2" point to point of Inverted V shaped bed rails. Has a 1/2" diameter bore mounts clockwise (right Handed) on the Headstock spindle with 20 threads per inch.

Custom alloy clamp or steady rest?? sears craftsman 6" metal lathe #109-20630

Birmingham, Michigan, United States
Nov 21st

This auction is for the Unusual Alloy or Pot Metal Steel & Brass Clamp from a Vintage 6" Sears Craftsman Metal Lathe Model #109-20630 with a 1 1/4" Gap between Bed rails and 2 1/2" point to point. The previous owner referred to it as a steady rest. It is @ 4 1/2" tall not counting the Brass Knob.

Cast iron plate from sears craftsman 6" metal lathe #109-0703

Birmingham, Michigan, United States
Nov 20th

This auction is for the Cast Iron or Steel End Plate as pictured from a Vintage 9" Sears Craftsman Metal Lathe Model #109-0703 with about a 2 1/8"Gap from point to point of Inverted V shaped bed rails. Wear and Tear Dust and Dirt rust and pitting but in Ok condition. Local Pick-up Available in Troy Michigan about 10 miles North of Detroit.

Feed lever assembly #3417 iron ++ from sears craftsman 6" metal lathe #109-0703

Birmingham, Michigan, United States
Nov 20th

This auction is for the Cast Iron & Steel End part as pictured from a Vintage 6" Sears Craftsman Metal Lathe Model #109-0703 with about a 2 1/8"Gap from point to point of Inverted V shaped bed rails. Wear and Tear Dust and Dirt rust and pitting but in Ok condition. Local Pick-up Available in Troy Michigan about 10 miles North of Detroit.

Assorted gears & hardware from sears craftsman 6" metal lathe #109-0703

Birmingham, Michigan, United States
Nov 20th

This auction is for the Cast Iron & Steel parts as pictured from a Vintage 6" Sears Craftsman Metal Lathe Model #109-0703 with about a 2 1/8"Gap from point to point of Inverted V shaped bed rails. Wear and Tear Dust and Dirt rust and pitting but in Ok condition. Local Pick-up Available in Troy Michigan about 10 miles North of Detroit.

Nib wolfcraft 4820 wood lathe made in germany complete with instructions

Oak Ridge, Tennessee, United States
Nov 20th

Ships immediately

Record power sc4 professional geared scroll chuck package

Ipoh, Malaysia
Nov 20th

The SC4 is perfect for the demanding woodturner, being capable of holding large work pieces yet possessing the precision and compactness to handle more delicate work. This model features an enclosed back with full indexing plate and has pinions driven by a long ball ended hex key to make access easy, even when large work pieces are mounted.

Record power cl3 lathe

Ipoh, Malaysia
Nov 20th

The very popular and reliable CL3 Lathe in great condition. We are selling because we no longer do any turning work Includes a brand new bowl turning attachment (a USD120 value) that allows you to turn bowls of a large diameter. See our separate listing for a SC4 scroll chuck package at a great price 240V / 50 Hz Dismantled for shipping - easy to put together again.