BG Pilot Valve Air Compressor Venting Style Pilot Unloader Valve PRODUCT OVERVIEW Piloted unloader valve for Gas Engine Compressors. Has a toggle-style manual unloader for load-free engine start and a throttle control port for operating engine throttle controls. Factory set to come on at 110psi and to go off at 130psi.
A NOS Furnas air compressor pressure switch with unloader valve. PN 69HAU1Z145175. Factory set cut in 145 and cut out 175 PSI Adjustable to your needs.
you are buying ONE new in the box Furnas Pressure Switch 69JG8Y seen in pic. we have a few more available at time of listing that we pulled from our coop store. buyer can purchase any multiple.
Universal pressure on/off switch will work on a lot of different brands and models of air compressors . 95 PSI on , 125 Off factory setting is fully adjustable to ether higher or lower settings . Electrical inlets are on the both sides or the top and bottom depending on how your switch mounts on your compressor .
CHAMPION AIR COMPRESSOR HR10-12 3PHASE 10HP COMPRESSOR WAS PURCHASED FROM AUTO REPAIR SHOP CLOSING DOORS 2 YEARS AGO. HAS BEEN TESTED THE ELECTRIC MOTOR IS PERFECT CONDITION ALONG WITH THE PUMP. TANK IS CLEAN AND SEALED TIGHT WITH NO LEAKS OR RUST.
This is a used dental dry air compressor. Works very well, needs a oil cap, and a plastic cover for one gauge but does not effect the running ability of this compressor. It has a dent in one of the air filters.
In Tank Check Valve 1" FPT IN LINE VERTICAL CHECK VALVE PRODUCT OVERVIEW For use where an In Tank check valve will not fit. The valve can be installed right in the discharge line of the compressor. Constructed machine brass body, 302 stainless spring, and 15% glass filled teflon poppet.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
