usb dosimeter for sale, brand-new and used.

This action is for 1 (one) assembled soldered Dosimeter MyGeiger OLD EDITION version 1.00 with the latest available firmware version installed. Take note: Geiger Tube, Battery, Case, TTL Module or any cables are NOT INCLUDED! This is retired version of the DIY Geiger kit, I have several last items in stock and I sell it for lowest price with big discount.

You are bidding for the new, fully assembled, microprocessor-based ionizing radiation counter with Black-on-Green LCD, threshold LED, button-and-Buzzer snap-on shield. This listing is without the Geiger–Muller tube, TTLSerial<>USB adapter and battery. So in order to use it you need to have a Geiger–Muller tube which works at voltages up to 525V.

NOW WITH LARGEST DETECTOR AREA, 10 SEGMENT ALPHA BETA GAMMA PANCAKE TUBE SBT10A ! You are bidding for the new, fully assembled, tested and seller pre-calibrated microprocessor-based ionizing radiation counter with LCD-threshold LED-button-and-Buzzer snap-on shield (battery, which is shown in the above picture - not included). USB<->TTL serial converter based on SILABS CP2102 chip is included for connecting the board to PC.

NOW WITH ONE THE BEST ?-DETECTING, 4-SEGMENT ?,?,? RUSSIAN-MADE PANCAKE TUBE SBT11 ! You are bidding for the new, fully assembled, tested and seller pre-calibrated microprocessor-based ionizing radiation counter with LCD-threshold LED-button-and-Buzzer snap-on shield (battery, which is shown in the above picture - not included).

Quest M-27 and Quest-M-28 noise dosimeters will transfer data to a computer and not just directly to a printer. The cable is hard to find and the pin-out instructions are not on the 3M Quest Technologies website. Build the cable from a common Quest #59-818 Centronics parallel printer cable following these instructuions.

JB.Lab DL701 Car Audio Digital Level Meter display Aux Time Stop-watch Volt SPEC Open/close Display In normal using, BAT light is always on. When ACC and REM are both on, LCD display begins, when this machine is on, you can turn ir off whenever pressing the POWER key. However, when either ACC or REM is light off, this machine is off.

JB.Lab Car Audio Analog Level Meter - Voltage Temperature Dual_LED (Spec) 4 display TEMP meter, left/right sound meter, volt meter LED button When press th button, you can exchange the LED color (Blue/Red) AUX input port It is used with the external machine (PMP, MP3, Smart phone...) Wiring diagram There is two method of wiring the sound of headunit. -High level input